Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Can't tighten loose handlebar
#1
Hello,

I took apart my son's old bike. It is a quill system handle bar and from reading, I think the wedge must have fallen into the frame because I can't get the stem bolt to renegade when I twist it with an Allen wrench. what can I do????

Amy
  Reply
#2
check to see if there is a hole all the way thru the fork and knock it thru the bottom, or take off front wheel and knock it thru. you do this with the stem and bars removed. then reattach the wedge to the stem and install
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
(06-09-2013, 05:28 PM)Wheelacw32 Wrote:  Hello,

I took apart my son's old bike. It is a quill system handle bar and from reading, I think the wedge must have fallen into the frame because I can't get the stem bolt to renegade when I twist it with an Allen wrench. what can I do????

Amy

there is a hole....when the handlebars are removed from the stem, I can look down inside and see the tire through this hole
  Reply
#4
(06-09-2013, 05:55 PM)Wheelacw32 Wrote:  
(06-09-2013, 05:28 PM)Wheelacw32 Wrote:  Hello,

I took apart my son's old bike. It is a quill system handle bar and from reading, I think the wedge must have fallen into the frame because I can't get the stem bolt to renegade when I twist it with an Allen wrench. what can I do????

Amy

there is a hole....when the handlebars are removed from the stem, I can look down inside and see the tire through this hole
now look under and see if it is big enough for it to fall thru. sometimes a reflector bracket bolt or a u-brake bolt runs thru that spot, if so it will need to be removed before proceeding to tap it thru
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#5
(06-09-2013, 05:55 PM)Wheelacw32 Wrote:  
(06-09-2013, 05:28 PM)Wheelacw32 Wrote:  Hello,

I took apart my son's old bike. It is a quill system handle bar and from reading, I think the wedge must have fallen into the frame because I can't get the stem bolt to renegade when I twist it with an Allen wrench. what can I do????

Amy

there is a hole....when the handlebars are removed from the stem, I can look down inside and see the tire through this hole

I GOT IT! took about three tries to get the wedge to stay, but PHEW. thanks for your help. I'm amazed I got the bike back together after my first time taking one apart! The gears don't change, but it pedals and the breaks are too tight, but I think a tune up at the bike shop should fix that!
  Reply
#6
nice job Amy, I am proud of you
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
18,430
09-10-2015, 01:20 PM
Last Post: nfmisso
 
SpeedBikeNut32
7,223
01-20-2015, 06:44 PM
Last Post: cny-man
 
11,613
07-02-2014, 08:14 PM
Last Post: nfmisso
 
13,397
12-15-2013, 06:13 PM
Last Post: 1FJEF
 
9,807
06-17-2013, 05:25 AM
Last Post: capner2112

Forum Jump:

[-]
10 Latest Posts
What tools have you bought recently?
Today 06:57 PM
Santini fluted frame
Today 06:47 PM
Expensive bikes with crappy wheels
Today 10:15 AM
Where are you from and What is your favo...
Yesterday 11:43 PM
2007 Trek Pilot S.P.A. 5.2
Yesterday 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
16 posts
no avatar 4. meamoantonio
15 posts
no avatar 5. GirishH
15 posts