Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Crank removal tool
#1
Hello,
I have a circa 1988 crankset - Shimano FC-M730.
I cannot find a puller/remover for it (have spent $70 so far).
Can anyone help me out finding the correct remover?
Thanks.
  Reply
#2
(02-12-2015, 11:32 PM)RGB Wrote:  Hello,
I have a circa 1988 crankset - Shimano FC-M730.
I cannot find a puller/remover for it (have spent $70 so far).
Can anyone help me out finding the correct remover?
Thanks.

I ran into a similar problem removing a suntour freewheel. I didnt have the tool to loosen it, as it is different from a shimano freewheel tool.  I took the wheel to a bike shop and the mechanic did it in two minutes for me and charged me nothing. So I bought the new freewheel from him and a couple of other items all totaling $40 bucks and the plastic dish. so if you have a local bike shop give it a try.
"Where ever we go, there we are"
  Reply
#3
Does it look like this?

[Image: 11452232793_333df47ce2_z.jpg]

A standard crank removal tool will work.  Have you remove the bolts or nuts holding it to the bottom bracket?
Nigel
  Reply
#4
(02-13-2015, 01:37 AM)nfmisso Wrote:  Does it look like this?

[Image: 11452232793_333df47ce2_z.jpg]

A standard crank removal tool will work.  Have you remove the bolts or nuts holding it to the bottom bracket?

Bolts holding crank to bottom bracket have been removed.
Hard to see from your picture if it is the same. Looks close.

Tool I am using but is wrong size and is from $150 tool kit - http://www.amazon.com/gp/product/B005KWRITO/

Thanks for your response.
Richard

(02-13-2015, 12:50 AM)elmore leonard Wrote:  
(02-12-2015, 11:32 PM)RGB Wrote:  Hello,
I have a circa 1988 crankset - Shimano FC-M730.
I cannot find a puller/remover for it (have spent $70 so far).
Can anyone help me out finding the correct remover?
Thanks.

I ran into a similar problem removing a suntour freewheel. I didnt have the tool to loosen it, as it is different from a shimano freewheel tool.  I took the wheel to a bike shop and the mechanic did it in two minutes for me and charged me nothing. So I bought the new freewheel from him and a couple of other items all totaling $40 bucks and the plastic dish. so if you have a local bike shop give it a try.

I would rather have to tool so I can do it myself. But I'm having such a hard time finding this I may have to take your suggestion.
Thanks for your reply.
Richard
  Reply
#5
(02-12-2015, 11:32 PM)RGB Wrote:  Hello,
I have a circa 1988 crankset - Shimano FC-M730.
I cannot find a puller/remover for it (have spent $70 so far).
Can anyone help me out finding the correct remover?
Thanks.

Perhaps try Chuck Wedges

Google for images of "Jacobs Chuck Wedges" - the means of use is obvious I think.

Ross
  Reply
#6
Hi Richard;

The correct tool is shown in the 2nd picture on the Amazon link you posted, right in the middle on the left.

Double check that the bolt or nut is removed from the BB axle - I don't know how many times I have forgotten to remove them first, then could not thread on the larger black piece.

When using this tool, first thing you have to do is completely separate the larger black piece from the threaded part with black end.  Screw the larger black piece in to the crank, tighten to at least 5 ft-lbs (if you do not have torque wrench, as tight as you can get it with a 4" long wrench).  This is VERY important, if this part is not properly tightened into the crank, the cranks will be damaged, and may have to be cut off the next time removal is attempted.

Next turn the threaded part with the black end into the black piece you just tightened into the crank.  The black end goes to the inside, and pushes against the bottom bracket axle.  The final pushing may take a great deal of torque (~100 ft-lbs) if the interface between the crank and the BB axle was not greased before the previous installation.  

You may have to remove the peddle and put a pipe over the crank arm, and have a breaker bar on the tool.
Nigel
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
5,106
08-14-2022, 07:32 AM
Last Post: ichitan
 
27,939
07-19-2021, 12:00 AM
Last Post: rbx
 
11,172
03-11-2015, 01:21 AM
Last Post: eastman
 
12,208
11-11-2014, 12:16 AM
Last Post: cny-man
 
15,448
09-27-2014, 09:44 AM
Last Post: Painkiller
 
22,709
08-13-2013, 05:48 PM
Last Post: !TREK4ME!
 
16,701
06-20-2013, 05:06 AM
Last Post: Joe_W
 
9,227
05-08-2013, 11:09 PM
Last Post: nfmisso

Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 01:39 PM
Expensive bikes with crappy wheels
Today 10:15 AM
Where are you from and What is your favo...
Yesterday 11:43 PM
2007 Trek Pilot S.P.A. 5.2
Yesterday 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
16 posts
no avatar 4. meamoantonio
15 posts
no avatar 5. GirishH
15 posts