Plastic gripshift

loreny1 · 03-10-2010, 07:21 PM

I can't swap out my gear cable because my (Schwinn SRAM MRX Pro 3.6 Racer) plastic grip shift won't come apart without breaking. So far I have cracked a few pieces off but I think it's still good. Any suggestions?

Alex Ramon · 03-10-2010, 07:27 PM

This isn't the exact same gripshift, but may offer some tips that could help:

http://bikeride.com/grip-shift-cable/

Upload some photos of your shifter and the pieces if you can!

loreny1 · 03-11-2010, 07:13 PM

(03-10-2010, 07:27 PM)Alex Ramon Wrote: This isn't the exact same gripshift, but may offer some tips that could help:

http://bikeride.com/grip-shift-cable/

Upload some photos of your shifter and the pieces if you can!

I did use that video for reference in fact it was the reason I was confident that I could do it. I thank you for assisting.

10 Latest Posts
Christmas presents for cycling 04-18-2024 10:23 PM
Lectric One 04-17-2024 09:58 PM
Cycling in the Wind 04-17-2024 03:45 PM
Do you have a four foot rule? 04-17-2024 12:49 PM
What New Year's Cycling Resolutions Do Y... 04-17-2024 10:58 AM
E-Bike with my camera 04-16-2024 09:47 PM
Tyres keep popping off wheels... 04-16-2024 04:45 PM
Saronni Colnago Critrium Frame set 04-16-2024 03:26 PM
Rear hub issue 04-16-2024 04:18 AM
Vintage (and mint) Torelli...unknown yea... 04-16-2024 12:43 AM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom