Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Mechanical disk cable tension
#1
Hayes MX3 mechanical disk, rear. Setting initial tension with new cable, after pulling tight and securing the pinch bolt, the tension relaxes. It seams that the caliper arm should stay put. Any hints here? Tks.

Reply
#2
I really don't know if this will help but here is a start:

http://www.hayesdiscbrake.com/hayesu_product1.shtml
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  V Brake tension problem Matchboxrob 1 4,716 01-07-2014, 12:23 AM
Last Post: 1FJEF
  Brake Tension Issue cronol 2 3,969 07-08-2013, 01:39 PM
Last Post: RBurrelli
  Noobie - Adjusting Mechanical disk brakes, brake lever is loose BigBossPW 8 10,893 07-08-2012, 05:59 PM
Last Post: BigBossPW
  Noise from front disk brake under pressure kwwmackenzie 5 6,498 06-20-2012, 11:48 AM
Last Post: kwwmackenzie
  Disk brake problem Stuttgartzerosix 1 2,771 06-20-2012, 01:49 AM
Last Post: RobAR
  Disk brake pads chris_the_outlaw3.3 3 5,559 06-17-2012, 02:02 AM
Last Post: chris_the_outlaw3.3
  Disk brakes self tighten spenc938 7 8,141 02-08-2012, 06:37 AM
Last Post: GeorgeET
  After Applying brakes the cable moves out of the tension adjuster socialfox1 2 5,626 05-06-2011, 04:20 PM
Last Post: trevgbb
  Loss of brake cable tension livpoksoc 4 8,952 04-27-2011, 10:12 PM
Last Post: painkiller
  Hayes Mechanical Front Disc alignment ehuget 1 6,087 09-01-2008, 08:49 PM
Last Post: Alex Ramon

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed