Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


10 speeds freehub compatible with 7 speeds cassette?
#1
Hi, I'm assembling a new bike for my daily commute and I would like to use a pair of wheel lying around. The thing is that it is equipped with a freehub for a 10 speeds cassette. I would like to have a 7 speeds cassette, what do I need to do to make it fit without buying a new pair of wheel? Will I need to re-dish the wheel?
Also, would you guys recommend a cassette with 11-28 or 14-28 cogs for a commute on a relatively flat commute?
Thank you, this is an awesome site!

  Reply
#2
1) No, it is not compatible. Check http://bikeride.com/freehub-body/ for a guide on how to replace the freehub body and http://sheldonbrown.com/k7.html for a list of compatibilities of cassettes and freehub bodies. Also, the frame spacing could be wrong. If you have a steel frame, you can try to cold set it. Don't do that with aluminum or carbon!
2) depends on the crankset (well, the chain rings). I have on my peugeot road bike front: 54/45 rear: 15-27 which is OK as long as I don't encounter hills. Calculator:<br />
http://sheldonbrown.com/gears/

  Reply
#3
Depends on the make of the freehub.<br />
If it's Shimano then probably will take a seven speed cassette.<br />
The majority of Shimano freehubs will take 7/8/9/10 speed cassettes.<br />
There are a couple of models that can be a problem but are rare.<br />
Take the wheel to your local bike shop and ask them to try one.<br />
It will need a small spacer behind the cassette to make up the difference.
http://www.amazon.com/gp/product/B001T8MXZW

As Joe_W says about frame spacing and crankset size.
Pick a cassette to suit the chainrings. Again you could ask your LBS.
What size chainrings do you have?
Ride hard or ride home alone!
  Reply
#4
Thanks for the replies. I don't thing that there will be an issue with my freehub after all since it's a shimano compatible one (10 speed), and "Also, hubs marked "8-speed, 9-speed or 10-speed will work with any number of sprockets! (Add a 4.5 mm spacer before installing a 7-speed cassette on an 8-, 9-, or 10-speed hub.)" (Seldon Brown in same link that Joe_W gave). As for my chainrings I plan on swapping an Ultegra 6400 (53/39) that I have on my beater bike. If I tell my LBS to put a spacer and a 7 speed cassette the will not have to re-dish the wheel?
As for the spacing in the rear triangle, I was planning to adjust it to make it fit with 10 speed freehub as describe on Sheldon Brown site (125mm to 130mm).

  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 07:44 AM
Where are you from and What is your favo...
Yesterday 11:43 PM
2007 Trek Pilot S.P.A. 5.2
Yesterday 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM
Falling back
03-24-2024 04:45 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
15 posts
no avatar 4. meamoantonio
15 posts
no avatar 5. GirishH
15 posts