Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
What do I need to remove this cassette
#1
Hi everyone,

I'm trying to remove this cassette for some much need cleaning, regrease the bearings, etc, and just because I want to. Which lock ring tool will remove this? It's not a shimano cassette, it says ''Tracer" on it. It is on a Jamis Explorer SX, probably 2002 model, 7sp cassette.

Thanks in advance.

Zach
Reply
#2
Do not recognize it. Did you use macrofocus?

Look at this site see if you can find a tool specific to your brand.

http://www.parktool.com/products/

BTW what are you flying, where are you?
Never Give Up!!!
Reply
#3
Ok I "think" I found your "type" of freewheel. Click here and look just above "Older Cassette Hubs".
http://www.parktool.com/repair/readhowto.asp?id=48

What they are saying is the the Lockring does not have to be removed in order to take off your freewheel. I am going to make a guess that you need a FR-1 from them. Before you purchase one do me a small favor and see if there is any printing on the plastic chain guard behind your freewheel please. Let me know.

Bill

P.s. Just for your own information here is a link with your model of bike with some info...
http://www.bikepedia.com/QuickBike/BikeSpecs.aspx?ItemID=36911&Type=bike
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply
#4
Bill,

There are 2 groups of numbers on the plastic chain guard. #1 is: 36H 24T-30T. #2 is YF-FH30-A
I have an FR-1, but its not big enough for the smallest cog. I have to take that one off first, then the FR-1 will fit the inner portion.
Thanks for the links.

Zach



(05-08-2010, 09:05 PM)Bill Wrote:  Ok I "think" I found your "type" of freewheel. Click here and look just above "Older Cassette Hubs".
http://www.parktool.com/repair/readhowto.asp?id=48

What they are saying is the the Lockring does not have to be removed in order to take off your freewheel. I am going to make a guess that you need a FR-1 from them. Before you purchase one do me a small favor and see if there is any printing on the plastic chain guard behind your freewheel please. Let me know.

Bill

P.s. Just for your own information here is a link with your model of bike with some info...
http://www.bikepedia.com/QuickBike/BikeSpecs.aspx?ItemID=36911&Type=bike

No macrofocus on the camera phone, sorry.

That pic was in a Cessna 172, in New Braunfels, TX.

(05-08-2010, 08:00 PM)GeorgeET Wrote:  Do not recognize it. Did you use macrofocus?

Look at this site see if you can find a tool specific to your brand.

http://www.parktool.com/products/

BTW what are you flying, where are you?
Reply
#5
Ok that sux that it is a Yung Fang Co spoke guard, some are shimano which would tell me a little more where to look. These kinds of bikes are put together with one thing in mind cost of assembly/parts low while try to sell as many as possible.


Is there anyway you can take a side snapshot of the cogs?
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Unknown cassette types and tools required to remove them GrandNouf 5 5,537 04-22-2013, 11:33 PM
Last Post: GrandNouf
  How to remove rear wheel and replace freewheel cassette? Toby83 6 14,516 10-26-2011, 02:59 PM
Last Post: NewtonSquare
  how do I remove this cassette? eorta7 9 8,088 01-20-2011, 05:47 PM
Last Post: GeorgeET
  How to remove Older Cassette (Instructional Video) Bill 4 6,825 03-28-2010, 04:40 AM
Last Post: Surly LHT

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed