Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
How to Adjust Your Front Derailleur How to Adjust Your Front Derailleur
* Now with 3D interactive instructions
Ceramic Bearing Jockey Wheels worth it?
#1
Hey all, its time to change my 10 year old Jockey wheels on my Shimano XTR Mega 9 mountain bike rear derailleur. Has anyone here tried out ceramic bearing or hybrid ceramic pulleys, like these from Enduro? I want to know if they are worth the extra $$. I mean, XTR sealed cartridge replacements are not cheap anyway, so I figure why not dive in all the way. But a $100 for 2 wheels.... Sad

[attachment=854]

ENDURO®
CERAMIC HYBRID
SHIMANO®
DERAILLEUR PULLEYS
FOR ROAD AND MTB

"ZERØ" GRADE 3 $99.00:
-SUPER LIGHT DELRIN® WHEELS
-GRADE 3 SILICON NITRIDE BALLS
-CHROMIUM STEEL RACES
-3X CRYOGENIC TREATMENT
-MAGNETITE FINISH
-ALUMINUM DUST COVERS
-INCLUDES UPPER AND LOWER PULLEY
Reply
#2
To be honest, I would not unless you are a racer. Only thing ceramic is for is the weight issue. Personally I think they would break down alot faster then alloy. I hear ceramic I think of dishes lol. That would save you extra money for on down the road repairs, i.e better tires, wheels, or something else you will need. Ultimately it is up to you but seems like a load of money for something that won't really increase much.


Bill
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply
#3
Bill, thanks. I agree that they are pricey for such a small piece of the puzzle. I have read that ceramic bearings and hybrids of them are over twice as strong/hard/durable than stainless steel ball bearings. The weight loss part isn't a big deal to me, as its just a few grams compared to the XTR wheels, my concern was reliability, performance & having no issues with them. It would be great to just buy one last set of these. I got almost 9 years from the originals.Smile
I was also thinking about ceramic dishes, lol. But do any of you remember in the early 90's, that ceramic baseball bats were all the rage, until they were banned everywhere because the ball came off them too hot and they were deemed dangerous due to their ability to be super lightweight, yet hard and durable over aluminum bats? so there may be something to it, I dunno.
Reply
#4
Ceramics do have lower friction, but you get much bigger payoff in a more critical area like BB or wheel bearings. If you have a 10 year old derailleur, I'd say just buy a whole new one. You probably have some play in the pivots after all those years. You'll get new pulleys and crisper shifting for not a whole lot more than just the pulleys.
Reply
#5
Plus the Shimano jockey wheels are probably almost as expensive as the new dérailleur... And as DaveM said: you'll benefit from a new one.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Ultegra jockey wheels Solidthegreat 4 5,350 06-22-2013, 10:08 PM
Last Post: painkiller
  Jockey Pulleys schrockbike 3 2,803 03-29-2013, 02:26 PM
Last Post: nfmisso
  Suntour GT Rear Derailleur Jockey Wheel Problem Alexander Coe 7 12,157 06-29-2011, 02:55 PM
Last Post: Clem
  Is Finish Line Ceramic Wax Lubricant good for rear derailleur? Toby83 5 11,619 10-11-2010, 01:21 AM
Last Post: dknk
  Jockey Pulley Rubbing on Largest Gear Kloosty 4 8,682 08-02-2010, 06:43 PM
Last Post: kcairo
  Jockey Wheels Ultegra Derailleur ruko 2 11,237 07-14-2010, 08:33 PM
Last Post: ruko

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed