Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Crank arm attachment bolt snapped
#1
So I thought I'd be a brave lad and investigate a rouge squeak somewhere in the pedals/crankset of a Motobecane Mirage I have. After I realized I didn't have the parts, I began screwing a nut back onto the bolt that i *think* holds the crank arm on. While doing this I over tightened and.. snapped the bolt.

[attachment=1156]

So my bike needs work and I am 'other-side' shade of green in the bike world. Plus, I've heard nightmares about replacing parts on french bikes. Is it worth scouring San Francisco for that one bolt/piece, or do you think it's more worth my time going for a full crank arm or crankset replacement? And, if the latter, what kind of parts am I looking for?

Thanksamuch for any input.
  Reply
#2
This is a cotter pin, see them on this page;
http://www.cyclesofyesteryear.com/cycleshop/sparepart.htm
however, your's is almost certainly a continental (Europe) size which is smaller than the Imperial size shown, you will have to search for these, a good (old fashioned) lbs should be able to find them for you.

To remove, simply tap out with a punch on the broken end, it helps to support the crank arm, then measure the dia. of the pin, if this is 3/8" then it's the imperial size, if it's smaller it's the continental size.

When re-installing, make sure the nuts are opposed, or you will end up with the crank arms out of line, it is also sometimes necessary to file the flat on the pin to get full engagment.
  Reply
#3
Further info, the dia. of the continental cotter pin is 9mm.(.352")
  Reply
#4
The size of the cotter pin will probably 9.5mm in all the ones I have handled even the English 3speeds that was the size, here are some more tips along with trev's http://www.sheldonbrown.com/cotters.html . Have to say that I never seen one break off like this one. Also here is the tool I use to remove them, BUT only get it if you work with bikes that have the cottered cranks .... http://www.bikesmithdesign.com/CotterPress/index.html
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#5
(07-13-2010, 11:41 PM)Bill Wrote:  The size of the cotter pin will probably 9.5mm in all the ones I have handled even the English 3speeds that was the size, here are some more tips along with trev's http://www.sheldonbrown.com/cotters.html . Have to say that I never seen one break off like this one. Also here is the tool I use to remove them, BUT only get it if you work with bikes that have the cottered cranks .... http://www.bikesmithdesign.com/CotterPress/index.html

Yes, Bill, bikes originating in the UK will have a cotter pin of 3/8" body dia. which = 9.5mm. but this is a French bike, and everyone I have worked on had a 9mm. cotter pin.
I had a root around in my bits and pieces box and actually have one of these!!
  Reply
#6
Ok, trev, I'll admit never had the pleasure of working on a French bike and I'm glad you shared this. The Brittany FreeSpirit I have shown was 9.5mm which is not a English make which is newer then the Armstrong I restored. This is definitely an area I want to do a video on.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
27,945
07-19-2021, 12:00 AM
Last Post: rbx
 
10,844
10-24-2015, 03:14 PM
Last Post: Eugbug
 
10,320
04-17-2014, 09:16 AM
Last Post: nfmisso
 
10,986
02-09-2014, 04:52 PM
Last Post: cny-man
 
4,810
05-18-2013, 09:10 AM
Last Post: big al

Forum Jump:

[-]
10 Latest Posts
What tools have you bought recently?
Yesterday 06:57 PM
Santini fluted frame
Yesterday 06:47 PM
Expensive bikes with crappy wheels
Yesterday 10:15 AM
Where are you from and What is your favo...
03-27-2024 11:43 PM
2007 Trek Pilot S.P.A. 5.2
03-27-2024 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
15 posts
no avatar 4. GirishH
15 posts
no avatar 5. meamoantonio
15 posts