Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
FSA headset - where does this washer go?
#1
My Look carbon fork/frame came with a FSA headset assembly. Included was a thin metal ring, the ID matches the OD of the steer tube. Is this the "special ring" called for in the Look schematic? The picture, however, looks like a cone shape, and I cannot see why they would want me to put an ugly bare metal washer under any top cap, especially a carbon one.

I saw some FSA diagrams, for other headset styles, that show a thin washer placed in top of the bearings and under the cover/cone. No diagrams can be found on the FSA website.

Anyone know about this?
Reply
#2
Is this on a threaded or thread-less headset?

If it's threaded then it probably goes between the two top nuts. (part 2.)

http://techdocs.shimano.com/media/techdocs/content/cycle/EV/bikecomponents/HP/EV-HP-5500-1740_v1_m56577569830609004.pdf
[font=Trebuchet MS]Ride hard or ride home alone![/font]
Reply
#3
(11-01-2010, 04:21 PM)cyclerUK Wrote:  Is this on a threaded or thread-less headset?

If it's threaded then it probably goes between the two top nuts. (part 2.)

http://techdocs.shimano.com/media/techdocs/content/cycle/EV/bikecomponents/HP/EV-HP-5500-1740_v1_m56577569830609004.pdf

Threadless - I was able to confirm it goes on top of top bearings and under the cover/cap. Thanks!
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  How important is a keyed washer? J. Hanley 8 4,479 11-23-2014, 06:04 PM
Last Post: GeorgeET
  Headset bolt spinning in threadless headset screwed up again 9 10,036 05-19-2013, 10:28 PM
Last Post: painkiller
  Integrated Headset vs. Internal Headset Bill 1 6,914 09-27-2012, 02:27 PM
Last Post: xerxes

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed