Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Sturmey Archer AW bearing cone spacing
#1
Hi, I have have just restored a very old (circa 1968) raleigh bike. It has an AW 3 speed hub. In my hast to rejuvenate the rear hub I have removed both bearing cones from the rear axle. It appears that the position of the cones on the axle is critical to proper gear operation. How do you reset the correct bearing position? ie If I had the replace the rear axle, how would I reset the correct cone position?

Cheers Aljac
  Reply
#2
Hi Aljac. start here - http://sheldonbrown.com/sturmey-archer.html - and follow the links!
Wheelies don't pop themselves. (from a QBP fortune cookie)
  Reply
#3
Also if you use the keywords "sturmey archer" in the upper right there should be a couple of posts with links on this site. Wink
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#4
(12-18-2010, 04:19 PM)aljac Wrote:  Hi, I have have just restored a very old (circa 1968) raleigh bike. It has an AW 3 speed hub. In my hast to rejuvenate the rear hub I have removed both bearing cones from the rear axle. It appears that the position of the cones on the axle is critical to proper gear operation. How do you reset the correct bearing position? ie If I had the replace the rear axle, how would I reset the correct cone position?

Cheers Aljac

The critical cone is the right hand one (sprocket side). Usually set at the factory and left alone for 50 years or so.
To set it, leave the left hand cone loose or off, then put the lh flatted axle in a vice. Then hand-tighten the rh cone (no wrenches!). Once it has bottomed, back it off half a turn (but no more than 5/8), then drop the lock washer over it and tighten the jam nut, while holding the rh cone steady (15 mm cone spanners). That's it.
Then install lh cone and tighten til there is only a little play in the wheel, lock in place. This is the only one you should mess with as the hub bearings wear with use.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post

Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 01:52 AM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM
Falling back
03-24-2024 04:45 PM
Derailluer Hanger Alignment Tool
03-24-2024 02:51 PM
Chain sits on top of chainring when shif...
03-24-2024 02:41 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
20 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. meamoantonio
15 posts
no avatar 4. GirishH
15 posts
no avatar 5. Jesper
15 posts