Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Uneven back tire
#1
I've had this bike in my garage for a while now, so I decided to clean it and ride it. But when I flipped it over to fix the chain, I started to peddle it with my hands and I noticed that the tire kinda scrapes onto the frame of the bike. The tires have no air, so I was wondering if this problem will be fixed once I put air into it again. Thanks in advance.
Reply
#2
Look at it again after filling with air. Since the bike was probably leaning to one side while stored the wheel may have set itself to one side.
Reply
#3
(04-18-2012, 02:02 PM)RBurrelli Wrote:  Look at it again after filling with air. Since the bike was probably leaning to one side while stored the wheel may have set itself to one side.

I just put air into them, but when I did, the back tire kinda popped and the under tube came out of the sides. Do you know how much that might cost to repair?
Reply
#4
Well, remove air and tire from the wheel, take a look if the rubber is still OK, and not crackling...
Then take a look at the bead if it's still solid and not deformed...

Reassemble the tire and tube on the rim, slowly inflate it while taking a look if the tire really seats in on the rim by prying it back and forth. Also be sure to not exceed the maximum pressure usually wrtitten on the side of the tire

Good luck!
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Free permanent Bicycle flat repair: tire within a tire Ares 4 6,499 02-11-2015, 04:54 PM
Last Post: elmore leonard
  Mongoose shaky back tire joseph wolf man 19 6,778 02-09-2015, 08:16 AM
Last Post: joseph wolf man
  Back Tire moves to the left fork as I ride. Dssdnt 4 4,982 03-02-2011, 08:53 PM
Last Post: DaveM

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed