Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
How to Adjust Your Front Derailleur How to Adjust Your Front Derailleur
* Now with 3D interactive instructions
Which Rear Derailleur for '92 Kona Hahanna
#1
Hi all,

My rear derailleur or rear mech I think you call it has sheared completely off so need to buy a new one but not sure what type is required or how much it matters.

Bike is a 21 Speed Kona Hahanna entry level MTB from 1992 ish. I've attached a couple of pictures which might help. Any advice greatly appreciated,

[attachment=3176][attachment=3175]

cheers

Matt.
Reply
#2
Matt,
It looks like your derailleur hanger has been bent pretty badly also. Before you invest any money in a new derailleur, you might want to try to straighten it without breaking it off by using the method shown here:

http://www.utahmountainbiking.com/fix/rhanger.htm

Be patient, use the longest bolt of the right size you can find, and bend it back into alignment in small increments. Good Luck!

Ride on, keep on riding
Riding on and on and on and on and on and on and on and on
Ride on, gonna have myself a good time - AC/DC

Reply
#3
Cheers Dude,

Yeah I thought that as well, but wasn't sure if it was the design! Doh. Will give it a go then, I haven't got the money to waste at the moment!
Reply
#4
Matt,
You can find some inexpensive rear derailleurs on ebay if the straightening works out. Just make sure you get one that matches the shifter activation ratio. i.e. usually shimano = 2:1, sram 1:1. By the look of the shifter in your picture it is a shimano type.

Ride on, keep on riding
Riding on and on and on and on and on and on and on and on
Ride on, gonna have myself a good time - AC/DC

Reply
#5
Beautiful thanks,

There's a community bike project local to me that probably have the bolt for the straightening job.
I can't quite get my head round 2:1 is that the ratio between largest cog size to the smallest of the sprockets? Will see how I get on.

Cheers!
Reply
#6
The 2:1 ratio refers to the amount of cable pull for the correct shimano indexed shifting (SIS). Your picture shows shimano shifters so you will need a shimano or shimano compatible derailleur.

Your community bike project might have a hanger alignment tool (somewhat expensive), which works better and easier than a bolt. If they do someone there should be able to show you how to use it.

Salute!

Ride on, keep on riding
Riding on and on and on and on and on and on and on and on
Ride on, gonna have myself a good time - AC/DC

Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  SRAM rear derailleur arm length jacke 0 2,327 06-28-2017, 04:52 AM
Last Post: jacke
  Road Bike Rear Derailleur Problem Lighttower 5 3,477 05-19-2017, 01:01 AM
Last Post: painkiller
  Rear derailleur rolling chain off It's your boy 0 4,405 06-05-2016, 04:36 PM
Last Post: It's your boy
  What would you use to replace a Suntour alpha 3000 rear derailleur? eab 5 5,428 08-09-2015, 04:33 PM
Last Post: nfmisso
  Replacing old rear derailleur eab 3 9,565 05-14-2015, 09:55 PM
Last Post: DaveM
  What if your new rear Dérailleur nordog 3 4,107 05-08-2015, 12:30 AM
Last Post: nfmisso
  Rear Derailleur Suicide Into Spokes. fribbles 5 5,910 04-25-2015, 05:22 AM
Last Post: nfmisso
  what Rear Derailleur hanger do i need pastaman06 0 4,722 04-24-2015, 08:36 AM
Last Post: pastaman06
  Rear Derailleur.. I have no idea what I'm doing jjc5 4 5,427 04-13-2015, 03:38 PM
Last Post: elmore leonard
  SRAM X9 - Rear Derailleur Pulley - Wobbles columkelly@yahoo.com 2 5,472 03-24-2015, 03:07 AM
Last Post: fredbyte

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed