Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Attaching water bottle holders on old bikes
#1
Hi,

How do you attach a water bottle holder to an old bike that doesn't have the screw holes for mounting them? Thank you for any input.
Reply
#2
You can buy adaptors that fit on the handlebar or seat tube that will allow you to attach a bottle cage to them. Check with your LBS as they should carry at least one type of adaptor.
HCFR Cycling Team
Ride Safe...Ride Hard...Ride Giant
Reply
#3
There's a bunch of ideas on this link that you can use
http://recklesscognition.wordpress.com/2009/01/13/methods-for-attaching-water-bottle-cages-without-screws-and-bosses/
Reply
#4
riv-nuts
Get on your bad pedalscooter and ride!
Reply
#5
You do not want to drill holes in your frame.

There are water bottle holders that use wrap around straps. Usually found in department stores . I got mine at Target.

You can also use the plastic cable ties , used by electricians. And there are handlebar mounts too.
Never Give Up!!!
Reply
#6
(03-26-2011, 02:52 AM)GeorgeET Wrote:  You do not want to drill holes in your frame.

There are water bottle holders that use wrap around straps. Usually found in department stores . I got mine at Target.

You can also use the plastic cable ties , used by electricians. And there are handlebar mounts too.

Ill go to the bike shop to see what they have. Tried the plastic ties, but it kept moving.
Reply
#7
stainless steel hose clamps with a short piece of sectioned inner tube to protect the paint work great.
Nigel
Reply
#8
(03-26-2011, 06:57 AM)nfmisso Wrote:  stainless steel hose clamps with a short piece of sectioned inner tube to protect the paint work great.

With the excellent ideas above if you are worried about the paint job using this idea you can put small pieces of inner tube between the hose clamps and frame which will also help to keep it from moving.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply
#9
Sounds like a good idea I'll try it thank you for all the input!
Reply
#10
I have seen some innovative water bottles recently...

- a two bottle holder that goes under/behind the seat. You might be able to get a smaller saddlebag underneath it

- a handlebar mount (sometimes you see these on bikes with time trial handlebars)
Reply
#11
(05-23-2011, 01:18 PM)monty3ross Wrote:  I am having a old bike so this is helpful for me.I attach a bottle holder behind the seat.

Did you read the above advice?
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Bottle bosses pulled out of frame surreypete 8 9,871 09-01-2013, 03:44 PM
Last Post: surreypete
  Made in USA water bottle Eric 13 6 5,256 10-03-2012, 01:08 AM
Last Post: RobAR
  Water bags - plastic flavour Portellini 6 10,571 04-25-2011, 11:55 PM
Last Post: RobAR
  Water Bottle Holder holes Bill 4 10,859 06-18-2010, 10:32 AM
Last Post: Bill

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed