Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
How to Adjust Your Front Derailleur How to Adjust Your Front Derailleur
* Now with 3D interactive instructions
Order of installation of new drivetrain?
#1
Hello all!

I am planning on upgrading the drivetrain on my mountain bike soon and was wondering what the best order it is to install the new parts. I will be going from a 8 speed Shimano mish mash to a 9 speed Shimano SLX set up. The new parts will be the cassette, the front and rear derailleurs, the crankset/ BB, chain, and new shifters. ( my current set up has integrated shift/brake levers- so I will install new brake levers as well). I have the tools I need to do the work, but I just need to know how to proceed. Thanks a bunch!
Reply
#2
read this article first;
http://www.jakesbikes.co.uk/content/348.php[/align]
Reply
#3
(03-30-2011, 03:33 PM)trevgbb Wrote:  read this article first;
http://www.jakesbikes.co.uk/content/348.php[/align]

I've read it before. I was gifted the SLX set up and it would be a definite improvement over my current drivetrain, therefore, I would like to take advantage of it.
Reply
#4
It really doesn't matter on the order but obviously you won't fit the chain until the chainset is on. Smile
You need to remove all the appropriate bits first and the grips from the bars.
Then I would start with bottom bracket and chainset then cassette.
Next- derailleurs, shifters, brake levers.
Set the hight and line up the front derailleur with respect to the chainset and then fit the chain.
Position and fix the shifters, brake levers and install the cables.
Now you should be able to turn the cranks and tune the derailleurs.
When satisfied all is right, fit the bar grips.
[font=Trebuchet MS]Ride hard or ride home alone![/font]
Reply
#5
(03-30-2011, 04:26 PM)cyclerUK Wrote:  It really doesn't matter on the order but obviously you won't fit the chain until the chainset is on. Smile
You need to remove all the appropriate bits first and the grips from the bars.
Then I would start with bottom bracket and chainset then cassette.
Next- derailleurs, shifters, brake levers.
Set the hight and line up the front derailleur with respect to the chainset and then fit the chain.
Position and fix the shifters, brake levers and install the cables.
Now you should be able to turn the cranks and tune the derailleurs.
When satisfied all is right, fit the bar grips.

Thanks.. I was thinking along those lines, but I was exactly sure when to install the cabling. Makes sense the way you laid it out.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Sram x-7 front derailleur new cable installation hbarkeret 5 9,063 10-08-2012, 09:29 PM
Last Post: bobtravers
  Rear Derailleur Re-Installation Problems stevedos 2 6,438 04-20-2009, 02:52 AM
Last Post: stevedos
  Shifting problems - new drivetrain Guest 3 5,084 07-19-2008, 10:32 PM
Last Post: Guest

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed