Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Thread busted on right pedal crank
#21
ok Ive decided to replace the crank after asking 2 local bike mechanics. Plus I could never trust a bonded pedal...especially going uphill!

But I want to do it myself to save money. I have found a crank set on ebay for just £11.50 + £3.50 postage. Its new and from rep dealer. Its sold over 50 of them and has 100% feedback.

Do you think this is suitable for my Giant boulder as Im not sure; Coyote triple crankset with 24/34/42 teeth & 170mm arms. Black steel & plastic chainguard.
[Image: 97r8yw.jpg]

Im worried about compatibility issues...or having to adjust the gears or chain. I think I can manage the crank replacement part following instructions. I need to buy or borrow a crank removal tool too.

But now Ive seen a suntour crank on ebay with 48-38-25 chainrings so thats bigger. This would effect the chain would it not? Does it matter about the ring size differences?

edit; now seen another at £20 total new; this is 48/38/28
[Image: fcme07.jpg]
Reply
#22
If you don't want to change more parts, stay as close to your original crankset as possible. Also, make sure that the cranksets you are getting are compatible with the BB and chain or you will need to change them as well. BB's are not very expensive, but chains can be.

I've never heard of the Coyote brand, but like the SunTour (and everything else now-a-days) it's most likely made in China. SunTour cranks are used by many bike manufacturers for their less expensive bikes, so you know that they are of some quality. My Giant Cypress came with a SunTour crankset and I've never had a problem with it in over 2,000 miles on that bike.

As for the tooth sizes, that is a matter of deciding if you want a crankset that will be a bit faster then the other.
HCFR Cycling Team
Ride Safe...Ride Hard...Ride Giant
Reply
#23
How am I supposed to know what crank my chain is most compatible with? Which toothsizes go faster(the coyote has another same price option of 48/38/28)? Chains seem to be around £7 total at the cheap end on ebay. If you buy a new chain do you need one of those link extractor tools too?

The coyote looks as good but just without the brand name on. Steel is steel right? Plus it has a chain guard on and mine has a small piece missing so thats a bonus.

A tip a local mechanic gave me was to look out for the smaller cog on the chain rings. Some are proper flat and some have a more dish shape. Well mine has a dish shape to it. Do the ones above look suitable?
Reply
#24
Well my current crank seems to have 42 teeth on biggest crank and 170mm arm(assuming you measure from central points of the connection points).

so I think the first posted coyote pic should be a similar replacement.
Reply
#25
Pedals have 1/2 or 9/19 thread. If you have 1/2 thread you can drill crank and cut new thread. In this case you will have to buy new pedals and ride with different pedals unless you convert another side too.
I guess you don't have tools for that job. If you buy new crank make sure pedal threads are the same or you will need to buy new ones.
I just checked Walmart website, they have new bikes for $59, but you don't have Walmart there?
http://www.walmart.com/ip/NEXT-Parowan-26-Men-s-Mountain-Bike/16318857
Unicycles need much less maintenance: Smile
http://www.walmart.com/ip/16-Unicycle/11065194
Reply
#26
Only thing I wanted to say is about repairing threads on the crank!

Glue Cost = 20 pounds
Loss of Life or limb = PRICELESS!
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply
#27
Well Ive ordered the first coyote crank. The arm length and teeth match the one I have so Im hoping its a straightforward swap. But I suspect Ill hit problems as Ive never removed a crank before. Ive borrowed a bike toolkit which has all the tools including crank removal tools. So all Ive spent so far is £16 total for the crank. Ill be very happy if thats my total costs!

I did actually acquire some steel epoxy glue. Whilst researching jb weld I hit on a forum where a couple of posters mentioned an equivalent glue... from the £1 store! They claimed it was even stronger than jb weld after using it. Just by chance I managed to find it in my local £1 store. But Ill use the glue for other stuff now. I could never be confident with a glued pedal. They take such huge pressure.
Reply
#28
You did well. Some things like accessories (that have no pressure or stress) is ok to use your jb glue on. Major parts I will say heck no to! No offense to anyone but that is one thing I do cherish, is personal safety. Giants are a pretty nice bike to put some money into Wink
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply
#29
Hi Zippy,

Did you get this crankset? I need to replace mine cause ive managed to strip the thread on the pedal! Looking at this crankset an wondering if its a " Buy cheap buy twice " Crank?
Reply
#30
I bought a new road bike. I had it tuned/assembled at LBS. I rode the bike at max. 3 hrs. at various times--very short gentle spins. The right pedal came off twice. I then brought it to a different LBS shop after reading this blog. Sure enough it was the Rt. Crank Arm that has to be replaced.
The store from which I bought the bike agreed to send me another crank arm thru the manufacturer. I am pleased about this and waiting for the part.

However, I am now wondering about the labor expense of replacing the Rt. Arm Crank. Does anyone know?

In addition, I just had platform pedals on the bike. Eventually, I was going to switch to a Shimano PD 234 (?) Dual Purpose in the event I get into biking and want to buy the specialized shoes. Why I mention this, is that I read on the blog that the problem with the threading breaking down is due to the Alum. crank against the steel pedal. Thus, I am perplexed because I don't want the same thing to happen over again. This is a problem and costly. Please Help?
Reply
#31
ok just gotta pipe up here because no one has mentioned the obvious thing,are you putting the pedals on the correct sides of the bike? the only time i have ever had a pedal fall off was because i had screwed the left pedal into the right side of the bike (think i was about 13 at the time).

as for using glues or bonding agents to hold pedals on ive got to agree with quite a few people here its a stupid and dangerous idea and your asking for trouble,i cant actually think of anywhere on my bike i would use glue apart from the rubber cement you use on punctures.

i changed the crank and bb along with a quite a lot of bits on my bike a few weeks ago,this is the crank i used http://www.halfords.com/webapp/wcs/stores/servlet/product_storeId_10001_catalogId_10151_productId_159276_langId_-1_categoryId_165545 just make sure you use some grease so if it ever needs replacing again its not too hard to remove.
ride until your wheels fall off
Reply
#32
Quote:Why I mention this, is that I read on the blog that the problem with the threading breaking down is due to the Alum. crank against the steel pedal.

Cougar, if the pedals are screwed in correctly, you won't have any issues with either the crank or the pedals. Depending on the bike shop, the mechanic may not be very experienced and/or may always be in a hurry, thus overlooking simple things like making sure the pedal isn't cross threaded before he tightens it down. Since my crank arm was replaced, I have ridden the bike over 1,000 miles, including a charity ride that was 50 mile/day for two days through some of what we call our worst hilly countryside. I have yet to have had another problem with the crankset or the pedals. The LBS that replaced the crankset put the pedals in correctly.
HCFR Cycling Team
Ride Safe...Ride Hard...Ride Giant
Reply
#33
yeah, same thing happen to me over a stupid mountain biking mistake zippy. I personally have had shimano cranks on my bikes. but i know most cranks anyways have warranties; call, sound pissed, and they cant refuse you (the manufacture).
Reply
#34
(04-04-2011, 06:19 PM)DaveM Wrote:  It is not the strongest possible design and I certainly won't claim that bikes couldn't be better designed for long term durability. But if what your saying is that you should be able to cross thread something and expect it not to break is not a powerful critique of bike design.

You messed up and cross threaded something and it broke. I've done it and I bet lots of others have. But I wouldn't really call that a design flaw. It's called screwing up.

I think most people here agree that gluing probably won't work well, but you're welcome to try it. The other options are helicoil or swapping the cranks. If the other crank set you have is from a similar style of bike, it will probably work fine. But of course, hard to know for sure without more info. If you post details about both, someone here can probably recommend.


Any of you Pommies ever thought about the difference between putting a Helicoil in and JB Weld in something made out of two different types of metals??? Let me break it down for ya... JB would work fine for steel to steel, but in most cases, the crank arm is aluminum and the pedal shaft is steel.... therefore STILL making the weak point the crank. To answer your question Z, Get a Helicoil kit and just tap out the new thread size and pitch, insert the STEEL Helicoil, and then put the pedal back in the new STEEL threads. All a Helicoil is is an expansion of the original threads. It's not gonna be perfect, but I can gaurentee from experience that it'll work just fine as long as you don't try putting 1000lbs on it or something stupid.
Reply
#35
There is a DYI. I just made one and seems to be working great as a temporary replacement (till the owner can afford a proper repair). This is also how I think pedals should be designed, using bolts, so you don't have to worry about stripped threads. I can't take all the credit though, I am pretty sure I remember my dad rigging up one of my bikes this way. He was very good at coming up with unusual ways to fix things.

Ok, so for what ever reason my picture wont attach or insert, so I made it my avatar. See to the left.
Reply
#36
Cost = 6$ not including wrench. Lost the gyration of the pedal but not really that important. Find a bolt and nut the same size of the pedal thread and replace.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Threaded Left Crank Arm (Pedal thread) square_eyes 7 4,970 09-29-2014, 11:03 AM
Last Post: square_eyes
  Crank brothers pedal rebuild peter o'sullivan 0 1,852 10-22-2013, 12:45 PM
Last Post: peter o'sullivan
  First bike restore... pedal crank issue, see pics liveanimal 7 5,978 10-15-2013, 02:55 AM
Last Post: nfmisso
  Cross thread Forrest1995 2 3,555 08-12-2013, 12:22 AM
Last Post: 1FJEF
  Crank thread gone! gb_wsko 2 5,521 06-26-2012, 03:20 PM
Last Post: xerxes
  JB Weld pedal-to-crank arm experiment Wolfie 2 10,431 07-07-2011, 03:35 PM
Last Post: nfmisso
  Crank Puller Failing to Pull Crank metellus 6 9,955 07-06-2010, 05:23 PM
Last Post: Billy
  My one pedal is stuck... is it my crank? AdisixBianchi 8 10,996 03-18-2010, 10:13 PM
Last Post: Surly LHT
  Pedal frozen into crank arm Familycat 6 9,626 02-19-2010, 07:08 PM
Last Post: Familycat
  Crank arm pedal threads are stripped antrossini 5 27,980 09-01-2008, 06:21 AM
Last Post: ozzzyrick

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed