Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
How I removed crank w/o special tool.
#1
1. Using drimel and sandstone I made a slight deep in the center of crank axle.
2. Put bike down on non-drive side.
3. Using rope hang your bike about 2-3 inches high above floor. Hook up rope on crank sprocket as close as possible to axle.
3. hold punch in the center of axle and hit it by hammer.


Disclaimer: for information purpose only, don't do it!!! I will not buy you a new bike and eyes!!!Smile
How bike should be hanged

[Image: crankremoval001.jpg]

deep in the center of axle prevents punch slip.

[Image: crankremoval002.jpg]

I made a punch from a bolt and used vise-grips to hold it.
[Image: crankremoval003.jpg]
Reply
#2
well its a better idea than what i done before i just hit the back of the crank with a hammer. It didn't work.
Reply
#3
walmart online $8.00 site to store free shipping
it is illegal to lynch a bicycle where I come from
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
Reply
#4
I forgot to mention that opposite bearing has to be partially removed.
Reply
#5
Cool idea but as you said informational purposes Wink !
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Crank removal tool RGB 5 4,411 02-13-2015, 05:49 PM
Last Post: nfmisso
  Crank Puller Failing to Pull Crank metellus 6 9,971 07-06-2010, 05:23 PM
Last Post: Billy

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed