Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
How To replace broken spoke?
#1
I discovered a broken spoke and in process of replacing it, can't figure out how to install the replacement. The video tutorial shows how to replace a spoke that you can drop the spoke into its hole in the hub with it going to the outside of the wheel. The one I have to replace has to be inserted the opposite way and short of bending the spoke to avoid the spokes on the other side I can't /won't be able to get it into position.
Reply
#2
It is fine to bend the spoke so it can pass over the spokes on the opposite side. Just be carefully to only bend it in a long smooth curve. Do not put any sharp kinks or bends.
Once you have it laced in, try to take the bend out before you tension it. And make sure to follow the same over/under pattern that the other spokes have.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  What spoke lengths for rear wheel M529 and Rhyno Lite? TrailShredder 10 5,309 04-02-2016, 12:13 AM
Last Post: jtj
  Spoke protectors? !TREK4ME! 1 2,168 01-19-2015, 05:24 PM
Last Post: nfmisso
  Spoke Tension Meter? daniel1988 3 2,550 08-10-2014, 05:17 PM
Last Post: cny-man
  Plastic Spoke Protector Guard. DragonWriter 2 4,313 07-16-2014, 09:18 PM
Last Post: DragonWriter
  Spoke length woes Duroon 15 19,401 05-23-2014, 05:38 AM
Last Post: danny1962
  Specialized Epic 29er rear wheel broken spoke DLH2014 5 5,474 03-19-2014, 03:47 PM
Last Post: Joe_W
  Spoke holes diameter simondr70 2 3,497 04-03-2013, 03:28 PM
Last Post: simondr70
  Spoke length confusion d3v 4 5,135 10-21-2011, 12:37 PM
Last Post: Joe_W
  What size spoke wrench do I need? eorta7 6 22,392 12-24-2010, 01:46 PM
Last Post: Bill
  Deep dish carbon wheel spoke tightening doughavlin 10 14,297 05-15-2010, 06:54 PM
Last Post: Joe_W

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed