Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Bike stand
#1
Bill suggested that I describe the quickie bike stand I built last weekend:

http://s211.photobucket.com/albums/bb8/dianemisso/Tandem%20110508/

the pictures show it holding our tandem.

I purchased two closet shelf brackets with hanger rod features and an 8' 2x4 from Home Depot. I already had 3" angle brackets, nails, screws and clamps. The 2x4 was cut into two pieces about 3' long and two pieces about 1' long. One of each was assembled into the 'L's using nails, then the screwed on angle brackets. The shelf brackets were positioned near the top. Foam was added to the rod support area to prevent scratching of the bike. A piece of plywood was attached to prevent side to side motion of the bike - didn't work so well with the steep seat post of the tandem - I'll be adding a foam covered L bracket soon.

I had this clamped to my work bench - ended being a bit high. I found a couple of scrap aluminum assemblies to clamp it to, which puts the bike at a good height for me.

Here are some earlier pictures with my SR Sierra on it:
http://s211.photobucket.com/albums/bb8/dianemisso/Blue%20110508/
Nigel
  Reply
#2
Hey Nfmisso,
I think I like it - but do you have any pics without the bike attached? Maybe I can get a better idea that way.
  Reply
#3
Sorry, not yet. I will take some after I get back from China, around Memorial Day.
Nigel
  Reply
#4
(05-09-2011, 11:14 PM)nfmisso Wrote:  Sorry, not yet. I will take some after I get back from China, around Memorial Day.

Cool! Have a good & safe trip!
  Reply
#5
That is soo cool! I may make one of these and I like the piece coming out mid level meeting the seat tube to keep it from angling!
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#6
Nice stand for bike and appreciate your work..Smile
Bike Rack || Bike Rack Reviews
  Reply
#7
Thank you Bill & Roger.

I did a little CAD work this morning (Sunday) and my wife put the screen captures in photobucket:

http://i211.photobucket.com/albums/bb8/dianemisso/Nigel%20Personal/explodedview.jpg
http://i211.photobucket.com/albums/bb8/dianemisso/Nigel%20Personal/stand.jpg

the first one shows how it goes together; but not the screws for the brackets. The second shows it assembled. It takes two to make the stand.

The piece coming out is just an old piece of plywood screwed to the 3 ft 2x4. A bungee cord is sufficient to hold the bike in place.

I put dense foam on every contact surface to protect the bike.

Hope this helps.
Nigel
  Reply
#8
So simple... and effective! Great idea, Nigel. Thanks for sharing the CAD drawing. I see a bike stand in my near future.
  Reply
#9
Yea thats pretty cool cad diagram.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
23,258
02-13-2012, 08:38 PM
Last Post: nfmisso

Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 01:52 AM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM
Falling back
03-24-2024 04:45 PM
Derailluer Hanger Alignment Tool
03-24-2024 02:51 PM
Chain sits on top of chainring when shif...
03-24-2024 02:41 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
20 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
15 posts
no avatar 4. GirishH
15 posts
no avatar 5. meamoantonio
15 posts