Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


2002 Vulcan Carrera - sizes please
#1
Just about to replace the bottom bracket on a standard 2002 Vulcan Carrera - all components seem to be Shimano. Does anyone know what size bottom bracket I need, and what fitting removal tool / crank pull I will need...


Thanks
  Reply
#2
i changed my bottom bracket a few weeks ago,the best way i found to get the size was to take it out and measure it,i also upgraded from a semi sealed to a cartridge bb.i actually used a hammer to remove my cranks rather than a puller but i wouldnt recommend that as my cranks and chainrings were being replaced as well. i used the tool in this link to actually remove the bottom bracket along with a 2 foot breaker bar and a blow torch (some idiot in the factory had glued it in place)
ride until your wheels fall off
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
14,318
02-11-2013, 05:00 PM
Last Post: 1FJEF

Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 01:39 PM
Expensive bikes with crappy wheels
Today 10:15 AM
Where are you from and What is your favo...
Yesterday 11:43 PM
2007 Trek Pilot S.P.A. 5.2
Yesterday 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
16 posts
no avatar 4. GirishH
15 posts
no avatar 5. meamoantonio
15 posts