Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Torques settings for bolt on skewer - Trek Session 88
#1
I would appreciate if anyone has info on the correct torque settings for the bolt on skewer for the rear wheel of a Trek Session 88:

http://www.trekbikes.com/us/en/bikes/mountain/gravity/session/session_88

The torque setting markings on the skewer itself have been scored and are unreadable. Specific setting seem unobtainable from either the Trek site, or from Bontrager, whose wheel it is:

http://www.bontrager.com/model/07857/

I am in the process of contacting Trek and Bontrager for the settings, but any help from forum members with this would be appreciated in the meantime.
Lennard Zinn lists torque settings as high as 65nm for steel bolt on skewers, and 85nm for titanium.

Has anyone here dealt with this particular model and Bontrager wheels previously?

Thanks in advance if anyone can help.
Reply
#2
Can't really answer this one as I haven't messes too much with skewer wheelsets.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply
#3
Hi Bill, thanks for the reply in any case.
Trek got back to me in this but were not able to provise a value for the torque required either. In fact, they said there were no recommended torque settings, this despite there clearly being a torque value printed on the skewer, which is no longer readable.
Had to settle for a guesstimate and hand tighten it.
Reply
#4
I think maybe there was one I did. Was on a front only and I basically did just that and hand tightened it. Put some pressure on the wheel itself one both sides at different points and seemed to be tight enough.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Need help! Problem with skewer, wheel, frame? RoxiLa5 1 1,962 06-20-2014, 08:19 AM
Last Post: DaveM
  Replace rear axle bolt with longer bolt on an electra 3-speed michelehart 5 4,539 11-03-2013, 07:46 PM
Last Post: michelehart
  Quick release skewer doesn't fit in hub/axle deedeeharris 12 9,677 05-19-2013, 06:57 AM
Last Post: FredS
  Changed skewer, back wheel jumps out of frame mollie4168 1 2,683 03-03-2013, 02:50 PM
Last Post: painkiller
  Skewer seems to long for rear dropouts BIGGCATT135 4 5,172 04-16-2012, 07:54 AM
Last Post: Joe_W
  Skewer broken inside hub capner2112 5 4,911 03-27-2012, 05:09 PM
Last Post: DaveM
  Skewer sizing k0p4n 3 12,805 05-28-2011, 08:57 PM
Last Post: k0p4n
  Changing rear wheel skewer pedropierre 6 9,435 04-13-2011, 12:26 AM
Last Post: kerhs
  Quick release skewer conversion NeilSampson 7 37,846 09-10-2010, 08:09 AM
Last Post: trevgbb

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed