Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Isis BB rebuild

I made a little picture tutorial while replacing the bearings on my ISIS bottom bracket. I would have abandoned this system long ago, if my Middleburn crankset wasn't so nice. But buying new BB's every few months is expensive and stupid. Too bad the bearings are not a common size and there was no cheap ebay replacements to be had. I found some Enduro bearings for 10$ and I thought I'd give them a shot. I think the main problem with the seizing bearings for me was the water accumulating inside the frame and getting to the bearings from inside the BB shell so I added a grease port to pack the BB inners with grease hoping to get a little more life out of the bearings. Plus drilled a drain hole underside the bb shell on the frame.

This tutorial is for a common ISIS type that is sold under many names, mine was stickered as NC-17 ISIS Pro.
[Image: 21291_1_NC-17_InnenlagerISISDrivePro.JPG]
Thats really incredible.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!

Possibly Related Threads...
Thread Author Replies Views Last Post
  ISIS bottom bracket - drive side 'cap' stolmen 2 4,081 10-30-2014, 01:27 PM
Last Post: cny-man
  Can't remove Truvativ Giga Pipe Team SL ISIS teho 25 28,147 02-11-2010, 10:35 AM
Last Post: jr14
  ISIS Bottom Bracket Repair Question Greg 7 13,088 09-24-2008, 08:35 PM
Last Post: McLovin

Forum Jump:

ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon