Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
700c Road Wheel Help!!
#1
Hello,

I bought a used bike (mid 80s peugeot ventoux) in an attempt to save money because I did not need anything fancy, just something to enjoy and get me from A-B.

Anyway, I hit a pothole on my last ride and bent the crap out of my rear wheel. When I took my bike to the local bike shop, they did not have any wheels in my price range and so I started looking on the internet.. The bike shop said I have 700c road wheels.

I found a 700c road wheel at a reasonable price but I was not sure if my tired would fit, so I emailed the company and asked. I gave them the tire size, 700x23c, and specifically asked if the wheel I wanted to buy would work PROPERLY. They said yes....
Long story short, the new wheels are too wide for my tires. So I need help looking for the correct wheel width. As I mentioned, I need a 700c road wheel that has the correct width to fit a 700x23c tire properly.

What metric should I be looking for when looking at wheels? Do you recommend any websites? Know of any second hand websites? The bike shop also said i have a threaded hub, which i guess are uncommon these days. I don't mind replacing he cassette though. Anything else I need to consider?
Reply
#2
Look for a 622-13 or 622-15 wheel with a freehub, not a cassette...

http://www.schwalbetires.com/tech_info/tire_dimensions#rim
Reply
#3
(05-26-2012, 05:07 PM)bobtravers Wrote:  Look for a 622-13 or 622-15 wheel with a freehub, not a cassette...

http://www.schwalbetires.com/tech_info/tire_dimensions#rim

Thanks Bob!
Reply
#4
Also measure the over locknut distance of the old wheel. If it is less than 130mm you will have a hard time mounting the wheel as you frame is too narrow...
What exactly do you mean with "too wide"? Is the rim diameter slightly too large to get the tyre on without resorting to force or is the rim width too wide so that the tyre cannot be seated correctly?
Reply
#5
(05-26-2012, 04:11 PM)mr. e Wrote:  Hello,

I bought a used bike (mid 80s peugeot ventoux) in an attempt to save money because I did not need anything fancy, just something to enjoy and get me from A-B.

Anyway, I hit a pothole on my last ride and bent the crap out of my rear wheel. When I took my bike to the local bike shop, they did not have any wheels in my price range and so I started looking on the internet.. The bike shop said I have 700c road wheels.

I found a 700c road wheel at a reasonable price but I was not sure if my tired would fit, so I emailed the company and asked. I gave them the tire size, 700x23c, and specifically asked if the wheel I wanted to buy would work PROPERLY. They said yes....
Long story short, the new wheels are too wide for my tires. So I need help looking for the correct wheel width. As I mentioned, I need a 700c road wheel that has the correct width to fit a 700x23c tire properly.

What metric should I be looking for when looking at wheels? Do you recommend any websites? Know of any second hand websites? The bike shop also said i have a threaded hub, which i guess are uncommon these days. I don't mind replacing he cassette though. Anything else I need to consider?

It would be cheaper to get 25mm tires than a new wheelset
Reply
#6
(06-23-2012, 08:58 PM)mpala007 Wrote:  I bought a used bike (mid 80s peugeot ventoux) in an attempt to save money because I did not need anything fancy, just something to enjoy and get me from A-B.

It would be cheaper to get 25mm tires than a new wheelset

If it's just A-B and he broke a rear wheel then maybe 28mm or 32mm tire on the rear if it will make it through the brake opening.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  29er tyre on 700c wheel? ibie1983 3 4,773 03-30-2015, 04:18 PM
Last Post: nfmisso
  700c rim with hop(flat spot). Can it be fixed? !TREK4ME! 2 2,608 09-27-2014, 03:44 PM
Last Post: cny-man
  27 1/4 to 700C (Old Miyata) raff 6 9,181 08-04-2012, 12:19 AM
Last Post: 1FJEF
  700c front + 26" rear? jhjh2345 5 10,393 02-10-2012, 05:02 PM
Last Post: nfmisso
  700c busymate 2 3,881 07-23-2010, 10:10 PM
Last Post: DaveM

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed