Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Rear wheel gets tightened with tightening the nuts
#1
I'm sorry because i'm not really familiar with bike issues so maybe my description won't be that clear

I got a hole in the rear wheel..got it out and fixed it..when i placed it back and tightened the nuts, i noticed that the wheel it self gets tightened as well..i mean not moving freely ..if any more information are important to provide please tell me

and thanks for your help in advance
Reply
#2
The issue is likely that the inner nut is tightening as you are tightening the outer nut.

Remove the wheel from the bike. Make sure the wheel turns freely, if not loosen the inner nut(s) just enough to have it turn freely. Place the wheel back on the bike and tighten the outer nuts. If the inner nuts continue to tighten you will need a slim wrench to hold the inner nut on while tightening the outer nut on the same side.
Brent

For instance, the bicycle is the most efficient machine ever created: Converting calories into gas, a bicycle gets the equivalent of three thousand miles per gallon. ~Bill Strickland, The Quotable Cyclist

http://cyclingat50.blogspot.com/
Reply
#3
The cones should be "locked" with the outer nuts, not the ones that hold the wheel in the frame, but the ones on the outer end of the axle, but inside the frame, or forks.

This may help explain: http://www.parktool.com/blog/repair-help/hub-overhaul-and-adjustment
Reply
#4
as others have said, this is probably due to the cones and locknuts not being tight enough. It is very important that they are properly set up as a loose RH cone can screw itself into the hub and ruin the hub, or even throw you off the bike!!
This cannot be done correctly without removing the gear block from the hub, as it is essential that the Right hand cone and locknut is locked up very tightly and in the correct position, with all subsequent adjustment carried out on the left side.
As you are not experienced in cycle repair, I suggest you get a price from your LBS for this, it could save you the price of a new wheel.
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Schwinn Meridian Rear Wheel Bearings Tyro65 0 3,441 04-08-2017, 09:26 PM
Last Post: Tyro65
  Rear wheel noise - help please luckstar69 4 4,422 08-17-2016, 06:31 AM
Last Post: Sixty55
  What spoke lengths for rear wheel M529 and Rhyno Lite? TrailShredder 10 5,618 04-02-2016, 12:13 AM
Last Post: jtj
  Rear wheel keeps shifting NotRequired 1 3,269 04-01-2016, 11:13 PM
Last Post: jtj
  Replacing rear wheel after patching a flat munnikm 3 4,657 12-04-2015, 09:33 AM
Last Post: munnikm
  Rear Wheel Nuts won't screw in Pugceratops 3 3,677 08-11-2014, 03:35 PM
Last Post: nfmisso
  Rear wheel troubles Ben1981 3 3,565 08-01-2014, 07:46 PM
Last Post: Ben1981
  Specialized Epic 29er rear wheel broken spoke DLH2014 5 5,731 03-19-2014, 03:47 PM
Last Post: Joe_W
  Mt. Fury Roadmaster 15 Speed Index Shifting Rear Wheel Problem devan264 4 6,589 03-17-2014, 11:53 AM
Last Post: cny-man
  New Rear Wheel For Specialized Epic Comp 2012 Pirks 3 3,473 02-27-2014, 07:26 PM
Last Post: 1FJEF

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed