Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Disk brake problem
#1
I am trying to get my front disk brakes to work correctly. Currently when the brake lever is pulled I hear a clamping metallic sound. I removed the brake pads, they look fine. Centered the caliper and adjusted as needed. All was fine the first 15 or 20 times then they went back the way they were. A clamping metallic sound with no braking what so ever. I am assuming I sound remove the main unit and caliper and clean? Any tips are welcome and thank you.

TG
Reply
#2
You removed the pads and inspected them - did not look glazed?
Are we talking Hydraulic or Mechanical?
All caliper mounting bolts are tight??
Wheelies don't pop themselves. (from a QBP fortune cookie)
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  V Brake tension problem Matchboxrob 1 5,074 01-07-2014, 12:23 AM
Last Post: 1FJEF
  Rear disc brake problem fraser 6 7,907 06-16-2013, 02:38 AM
Last Post: painkiller
  Disc brake problem jschaben 11 33,759 02-24-2013, 04:27 AM
Last Post: adarsh
  SHIMANO BR-M445 brake problem castoro 2 14,589 07-25-2012, 05:03 PM
Last Post: castoro
  Noobie - Adjusting Mechanical disk brakes, brake lever is loose BigBossPW 8 11,477 07-08-2012, 05:59 PM
Last Post: BigBossPW
  Simple (i think) brake problem dfreed 2 5,147 06-30-2012, 04:38 PM
Last Post: nfmisso
  Noise from front disk brake under pressure kwwmackenzie 5 6,827 06-20-2012, 11:48 AM
Last Post: kwwmackenzie
  Disk brake pads chris_the_outlaw3.3 3 5,888 06-17-2012, 02:02 AM
Last Post: chris_the_outlaw3.3
  Disk brakes self tighten spenc938 7 8,426 02-08-2012, 06:37 AM
Last Post: GeorgeET
  Brake lever problem jnewk81 4 9,074 04-24-2011, 03:28 PM
Last Post: jnewk81

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed