Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Chain slipping on cassette cogset
#1
I am new here. Found this forum while trying to find a solution to this problem and really hope someone can help me. I had to replace the rear wheel of my Next mountain bike and found a used one that looked like new. After putting the tire on it and mounting it on the bike, I tried to ride it but the chain slipped on the outside two cogs. So I removed the wheel and examined the cogset [cassette type] and noticed the outer two cogs were slightly loose. So I attempted to tighten the cog retainer but it was already as tight as it could go and still those two outer cogs were loose. It appears to me that the chain is slipping because those cogs are loose and that something is missing.... perhaps a washer that would snug those two cogs. BTW, the inner five cogs are a single unit.

I have no experience with these cassette cogsets so I have no idea how to service them.

As I mentioned, otherwise the wheel is like new. The cassette mechanism appears to be perfect, and the chain only slips on the outer/smallest cogs.

Ironically and adding to the mystery, I came across another wheel that has the exact same problem. It is older and has signs of age but it also has the same problem with the outer two cogs being loose. I have tried swapping out the cogsets between the two with no success. So I have two wheels but can't use either of them.

Any help would be GREATLY appreciated!
Reply
#2
BTW, the cluster I am having the problem with has 7 cogs. I am thinking the cassette is intended for 8 cogs and this could be my problem. I came across a 4mm cassette spacer on ebay that is intended to fill the gap for a 7-cog cluster on an 8-cog cassette. Would this be the solution to my problem? And if so, wouldn't a common washer large enough to fit on the cassette work just as well?
Reply
#3
(07-09-2012, 11:30 PM)wcgreen3 Wrote:  BTW, the cluster I am having the problem with has 7 cogs. I am thinking the cassette is intended for 8 cogs and this could be my problem. I came across a 4mm cassette spacer on ebay that is intended to fill the gap for a 7-cog cluster on an 8-cog cassette. Would this be the solution to my problem? And if so, wouldn't a common washer large enough to fit on the cassette work just as well?

Ok to assist us with this is there anyway you can upload pictures of the one your having problem with and the one you are replacing? In my experience of restoring a Next they only had 7 cogs. Is this a Power Climber?
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply
#4
(07-09-2012, 11:30 PM)wcgreen3 Wrote:  .....Would this be the solution to my problem? And if so, wouldn't a common washer large enough to fit on the cassette work just as well?

Maybe

No !!! the spacer has to be the correct thickness, and to a much tighter tolerances than common washers.

As Bill said - pictures please.
Nigel
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Chain slipping off gear shifter(?) ashw 4 2,986 07-29-2016, 07:42 PM
Last Post: GeorgeET
  Chain slipping on a self-repaired bike toor 4 9,342 09-17-2014, 11:00 AM
Last Post: cny-man
  Chain slipping when shifting nishikibike 4 3,363 09-06-2014, 11:35 AM
Last Post: cny-man
  New chain AND cassette, now skipping (a lot) ni4na.347 11 19,925 09-02-2014, 08:41 PM
Last Post: ppp333
  Sram cassette an chain jhahern 3 4,113 07-09-2013, 01:43 AM
Last Post: bobtravers
  Help choosing chain and cassette Graeck 3 6,668 07-01-2013, 10:55 PM
Last Post: 1FJEF
  New cassette & chain, now getting vibrations in pedals da_guy2 4 5,458 07-17-2012, 04:30 PM
Last Post: nfmisso
  Slipping Chain Again! backo 2 4,937 06-02-2012, 06:15 PM
Last Post: xerxes
  Upgrade: BB, Cassette, chain, chainrings & crankset Fox 1 5,042 02-28-2012, 05:25 PM
Last Post: DaveM
  New Chain + Cassette, Slippage when in small front and mid-to-small rear reform 7 10,459 02-26-2012, 09:31 PM
Last Post: bikeracr45

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed