Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
How to Adjust Your Front Derailleur How to Adjust Your Front Derailleur
* Now with 3D interactive instructions
Front Derailleur Needs Constant Adjustment
#1
I bought a new 24 speed hybrid bike a couple of months ago. Very soon after picking it up I started having problems shifting from the middle to the largest chainring. Needed (what to me) seemed like excessive pressure on the thumb shifter to get it to engage. This got progressively worse until I was also having problems shifting down. The bike has been back to the retailer a couple of times now but the problem returns soon after. I've also had a go myself from the tech doc & got everything changing smoothly but 50 miles later, I'm again having problems.

Derailleur is a Shimano FD-M191, shifter is ST-EF51.

I'm struggling to understand what could cause the adjustment to go out so quickly & would be grateful for any suggestions.

The rear shifts cleanly & always has.
Reply
#2
Could be that the derailleur is not tightened to the frame properly and is slipping, could be the cable is slipping, could be the housing is not seating properly or is starting to slip through the little cups that catch the ends, could just be that the cable is stretching (as new cables usually do) and it will settle down once you get it adjusted again. Or it could be something else...
Sorry I can be more helpful without more specifics.
Reply
#3
(07-24-2012, 08:01 PM)DaveM Wrote:  Could be that the derailleur is not tightened to the frame properly and is slipping, could be the cable is slipping, could be the housing is not seating properly or is starting to slip through the little cups that catch the ends, could just be that the cable is stretching (as new cables usually do) and it will settle down once you get it adjusted again. Or it could be something else...
Sorry I can be more helpful without more specifics.
Thanks.

Derailleur seems solid as is still parallel to the chainrings & the vertical gap seems constant.

Cable clamp seems to do it's job.

Surely a new cable shouldn't stretch that much? As I said, the rear has shifted perfectly from day one with no adjustment.

Happy to provide any further information that may help diagnose.
Reply
#4
Dave steered you in the right direction. Like anything else manufactured in mass quantities by a machine, ferrules (the metal boot at each end of the cable housing) can pass QC inspection and fail in use. It is a $0.15 cent part, luckily. A missing ferrule will cause the same problem. Do you have black plastic ferrules? I don't trust them.
It may also be that a Brake Housing Ferrule was inadvertantly installed on your Drlr Cable Housing. They ARE different on better quality bikes. Brake cables are larger diameter than drlr cables.
Wheelies don't pop themselves. (from a QBP fortune cookie)
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Front derailleur shifting problem dventura 1 6,365 02-28-2017, 06:07 PM
Last Post: nfmisso
  Front derailleur won't shift into third (largest) gear bruin1989 1 6,836 08-01-2016, 07:14 AM
Last Post: Joe_W
  Front derailleur can't shift from inner chainring to outer...sometimes Ptero 2 4,647 07-19-2016, 02:15 PM
Last Post: Joe_W
  Front derailleur drags on middle chainring? fionn88 1 4,690 06-09-2016, 08:56 PM
Last Post: DaveM
  Remove chain from front derailleur rider2 1 3,968 05-13-2016, 04:16 PM
Last Post: DaveM
  Chain Coming off Randomly / Front Derailleur Jlpicard440 12 6,673 09-07-2015, 06:29 PM
Last Post: painkiller
  Blocked front derailleur? dude 2 3,446 08-27-2015, 06:38 AM
Last Post: dude
  A Front Derailleur mounting and matching problem. qipow 0 3,589 08-08-2015, 11:53 AM
Last Post: qipow
  Front derailleur adjustment dude 3 5,963 07-26-2015, 04:38 PM
Last Post: painkiller
  Removed front derailleur. elmore leonard 22 13,384 04-26-2015, 04:13 PM
Last Post: elmore leonard

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed