Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Schwinn Varsity Newbie Restoration
#1
Hello, I want to get started fixing up a 1973 Schwinn Varsity basically for the heck of it. Thought fun to use on pub nite rides. Very much a newbie. Was planning on taking apart and cleaning. Would like to repaint frame. This is not going to be a collectors item. A place near me will strip the paint and powder coat. Concerned about decals. Can I just use vinyle peal and stick or is that a bad idea? Thanks in advance.
  Reply
#2
(08-21-2012, 03:23 PM)dochoot Wrote:  Hello, I want to get started fixing up a 1973 Schwinn Varsity basically for the heck of it. Thought fun to use on pub nite rides. Very much a newbie. Was planning on taking apart and cleaning. Would like to repaint frame. This is not going to be a collectors item. A place near me will strip the paint and powder coat. Concerned about decals. Can I just use vinyle peal and stick or is that a bad idea? Thanks in advance.

Carefully consider the cost of a qualitystrip or sandblast and powdercoat of the bike's frame and whether there is any underlying value to the bike and its mission to justify the cost. In my city I hear $200 to $300 for what is probably mediocre quality. You should be able to find decals on ebay, eventually. Clear coat over them.
  Reply
#3
Make sure that you plug/mask all the critical holes and surfaces. It is VERY VERY difficult clean out powder coat from surfaces that must be bare. Many a bike restorer has had to either give up on making the frame into a bike or spent 2½X planned amount on strippin the brand new powder coat off, properly plugging and masking and re-powder coating. Use a shop that has satisified bike customers for powder coating, they are worth the extra $$.
Nigel
  Reply
#4
Thanks for tips. Will check to see how experienced they are.
  Reply
#5
[attachment=3442]test post pic
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
3,189
10-30-2020, 02:07 PM
Last Post: Jesper
 
6,613
08-20-2016, 01:27 AM
Last Post: adman2001
 
12,056
12-31-2015, 12:36 PM
Last Post: GeorgeET
 
12,330
01-06-2013, 01:50 PM
Last Post: JoeFaz
 
22,242
08-21-2012, 06:58 PM
Last Post: Bill
 
22,132
06-05-2011, 01:33 PM
Last Post: Half a Load
 
12,078
05-01-2011, 11:16 PM
Last Post: Myosmith
 
8,023
04-11-2011, 11:29 AM
Last Post: cyclerUK

Forum Jump:

[-]
10 Latest Posts
What tools have you bought recently?
Yesterday 06:57 PM
Santini fluted frame
Yesterday 06:47 PM
Expensive bikes with crappy wheels
Yesterday 10:15 AM
Where are you from and What is your favo...
03-27-2024 11:43 PM
2007 Trek Pilot S.P.A. 5.2
03-27-2024 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
15 posts
no avatar 4. GirishH
15 posts
no avatar 5. meamoantonio
15 posts