Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
How to Adjust Your Front Derailleur How to Adjust Your Front Derailleur
* Now with 3D interactive instructions
Sram x-7 front derailleur new cable installation
#1
I watched the "how to replace a grip shift cable" video, but it doesn't make sense for my sram x-7 front derailleur--the casing won't come apart like in the video. Am I missing something obvious? There's a screw in the casing above where the cable exits the housing, but taking that out doesn't seem to affect anything.
Reply
#2
You have problem putting the cable in the shifter or onto the derailleur?? It's not clear for me!
Reply
#3
(10-08-2012, 01:18 PM)bobtravers Wrote:  You have problem putting the cable in the shifter or onto the derailleur?? It's not clear for me!

I can't put the cable in the shifter because I can't get the shifter housing open.
Reply
#4
is your shifter a SRAM X-7 too??

If yes, take a look at this...

http://cdn.sram.com/cdn/farfuture/eU1UZaZ-AqTVe3GMjWvTD4B6xAcYfkyYYVzewQmyvcs/mtime:1297962098/sites/default/files/techdocs/SL_X0_X9_X7_Rock_Att_1_03_0.pdf
Reply
#5
(10-08-2012, 07:30 PM)bobtravers Wrote:  is your shifter a SRAM X-7 too??

If yes, take a look at this...

http://cdn.sram.com/cdn/farfuture/eU1UZaZ-AqTVe3GMjWvTD4B6xAcYfkyYYVzewQmyvcs/mtime:1297962098/sites/default/files/techdocs/SL_X0_X9_X7_Rock_Att_1_03_0.pdf

My shifter is a shimano slx. Thank you for the link, Bob. It helped me figure out how to get the cable out of the port--I'd already discovered the port, but didn't know the procedure for digging out the cable-end. Basically, this shifter housing doesn't need to be taken apart to change the cable. There is a quick-change port that can be opened, the cable-end can be gotten out with a small screwdriver, the cable can be pulled out and a new one simply inserted back through. Thank you for the help!
Reply
#6
Be sure to put install the cable in your derailleur while putting some tension on it before rotating your shifter... That way, you will be sure that the cable end is still in the right position inside of the shifter, and it will not damage the inside parts of it
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  SRAM rear derailleur arm length jacke 0 1,934 06-28-2017, 04:52 AM
Last Post: jacke
  Front derailleur shifting problem dventura 1 6,611 02-28-2017, 06:07 PM
Last Post: nfmisso
  Front derailleur won't shift into third (largest) gear bruin1989 1 7,508 08-01-2016, 07:14 AM
Last Post: Joe_W
  Front derailleur can't shift from inner chainring to outer...sometimes Ptero 2 4,810 07-19-2016, 02:15 PM
Last Post: Joe_W
  Front derailleur drags on middle chainring? fionn88 1 4,794 06-09-2016, 08:56 PM
Last Post: DaveM
  Remove chain from front derailleur rider2 1 4,089 05-13-2016, 04:16 PM
Last Post: DaveM
  Mixing SRAM shifters and Shimano derailleur nameused 17 93,861 02-23-2016, 04:55 AM
Last Post: budstutor
  Chain Coming off Randomly / Front Derailleur Jlpicard440 12 6,901 09-07-2015, 06:29 PM
Last Post: painkiller
  Blocked front derailleur? dude 2 3,551 08-27-2015, 06:38 AM
Last Post: dude
  A Front Derailleur mounting and matching problem. qipow 0 3,658 08-08-2015, 11:53 AM
Last Post: qipow

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed