Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


How many bearings should there be?
#1
I'm overhauling the headset on this crusty Supercycle.

Should there be this much space between bearings? Should I fill in races with more bearings?

I'm also curious as to the size of the bearings, they are definitely smaller than the 3/16" and I'm not familiar with them.

Thanks!
  Reply
#2
Ahhh there is finally another head set like the Armstrong 3spd I have Smile. Answer is no you are missing maybe 3 bearings. You will definitely want to replace all of those. Umm I think I listed the size that I used on my Armstrong thread.
http://forums.bikeride.com/thread-1643.html
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#3
Well, take a caliper and measure one bearing...

Then, put as much ball bearings you can, minus 1...

There you go!
  Reply
#4
Looks like the bottom race is missing 3 bearings and the top 1. There should be play between bearings totaling about one bearing. Do not jam the bearings in tightly. Scrub your races well with a plastic dish cleaning pad like scotch brite dipped in oil or WD40 till clean. Take a bearing to a hardware store or better bicycle store and get all new stainless steel bearings, than use good marine waterproof bearing grease, if you can, and lubricate well. Wipe off excess after assembly.
Never Give Up!!!
  Reply
#5
Putting this back together is a little tricky! When you put the new grease in just add a little more so the bearing will stick to the race and not fall out. Sorry I looked over my own post mentioned earlier and I guess I did not say the size of bearings. However I think they are a weird size like 7/32. As front wheels are 1/4 and rear wheels take 3/16. Definitely listened to Geoge and bob. BTW Hey bob longtime old friend.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#6
Thanks for the feedback everyone. I'll pick up new bearings and grease these puppies up good.

No worries Bill,it was an interesting thread nonetheless.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
2,735
02-07-2022, 02:46 PM
Last Post: Jesper
 
3,201
08-30-2021, 03:46 AM
Last Post: Poissonj1
 
18,980
05-26-2015, 02:31 PM
Last Post: eric1023
 
40,997
01-13-2015, 12:13 PM
Last Post: joseph wolf man
 
17,434
09-16-2014, 01:39 PM
Last Post: GeorgeET
 
7,242
12-25-2013, 07:11 AM
Last Post: SchwinnMonkey
 
20,807
09-02-2012, 02:29 PM
Last Post: Philburns

Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 01:39 PM
Expensive bikes with crappy wheels
Today 10:15 AM
Where are you from and What is your favo...
Yesterday 11:43 PM
2007 Trek Pilot S.P.A. 5.2
Yesterday 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
16 posts
no avatar 4. GirishH
15 posts
no avatar 5. meamoantonio
15 posts