Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Front gear shift stopped working...
#1
my brother lend me his trek bike
pic: http://i.imgur.com/VwkiaZN.jpg

the cables were chewed up from his dog and all but i took it to a bike shop and they replaced all of it and the bike was fixed.

today i took it on a ride and since i am new with riding a bike with front shifting gears; i started messing with them more than usual and now the my gears wont shift... its stuck on gear 2 ( the bike has 3 shifting gears)

pics of where the cable is

http://imgur.com/CaKpPzL,es51kbj#0

http://imgur.com/CaKpPzL,es51kbj#1
  Reply
#2
Define..(i started messing with them more than usual and now the my gears wont shift)...As in disconnecting the cables and fiddling ?
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
(05-26-2013, 07:16 PM)painkiller Wrote:  Define..(i started messing with them more than usual and now the my gears wont shift)...As in disconnecting the cables and fiddling ?

theres nothing out of place... i took a video ill upload it cus i dont wanna pay another 100 bucks..

http://www.youtube.com/watch?v=b6QKxIq-gmw
  Reply
#4
look @ this
http://www.youtube.com/watch?v=ngm6dr-1na0
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#5
Zeus,

since you're bike seems like it's either from early 2000's, It's very possible that you shifters grease is hardening up pretty bad. ...... One way to verify that it's the front shifter is to undo the cable off the front derailleur. .. check if the front shifter clicks 1-3/3-1.. if it does not then that's the problem, stuck shifters can result from the old grease hardening up.


You can try WD-40 (a degreaser/ water displacement) on the front shifter .. give it a soaking.. try clicking it.. and work it's way

keep trying it repeatedly til it works loose ..... try this for a good 5-10mins or until it works loose.. just clicking away.. to get the WD-40 to work the grease loose.


worse case take off the shifter.... remove the the covers of the shifter.. make sure it WD-40 Soaks.. and then rinse.. then re-grease with superlube ..

I rescued a bit of older mountain shifters using WD-40 and eventually re-greasing them.

Note, your rear shifter might also have issues soon because of the hardening grease too..

after you get the shifter working go through the front derailleur adjustment that painkiller provided.

If you don't regrease it after WD-40, be sure to apply somekind of lube like triflow or some kind of chain lube...
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
What tools have you bought recently?
Yesterday 06:57 PM
Santini fluted frame
Yesterday 06:47 PM
Expensive bikes with crappy wheels
Yesterday 10:15 AM
Where are you from and What is your favo...
03-27-2024 11:43 PM
2007 Trek Pilot S.P.A. 5.2
03-27-2024 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
15 posts
no avatar 4. GirishH
15 posts
no avatar 5. meamoantonio
15 posts