Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Crank Arm Stuck
#1
Hi all,
My first post on here, I'm after some advice please. I need to replace my bottom bracket so set about taking the crank arms off. I got a crank arm tool and the left side came off easily. Then I screwed the crank arm tool in to the right side arm, started tightening it up and it started pushing back out of the crank arm. So basically now I have a crank arm stuck fast on to the BB, but the threads on both the crank arm tool and the crank arm are completely mashed. What are my options? Angle grinder, and add a new crank arm on to my bottom bracket order too?!
Thanks in advance...
Matt
  Reply
#2
20-20 hindsight, sounds like the crank removal tool did not get fully seated in the crank arm.

Unfortunately the arm, BB and tool are shot. I have had some success with a gear puller from Harbor Freight on similar cases - usually a bit quieter than an angle grinder.
Nigel
  Reply
#3
You may be able to cut a slot in the crank arm without damaging the BB spindle (though it sounds like you're replacing the BB anyway.) If you cut a slot through one side of the arm, it will usually loosen enough that a tap or two with a hammer will knock it off.

The threads on your crank puller may be fine. If the crank is aluminum, it is much softer than the puller's thread's. You may need to get all the aluminum shavings out of it, but it may not have done any damage to the tool.
  Reply
#4
some take a ride around the block and it should loosen up or fall off! watch your #@** you could get hurt
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
27,951
07-19-2021, 12:00 AM
Last Post: rbx
 
7,434
02-06-2016, 07:17 PM
Last Post: Lighttower
 
11,168
05-19-2015, 08:48 AM
Last Post: alexwang32
 
8,141
02-19-2014, 03:33 AM
Last Post: GeorgeET
 
48,894
10-21-2012, 07:19 AM
Last Post: FredS
 
9,256
10-26-2011, 11:43 AM
Last Post: chibler
 
25,396
09-26-2011, 12:00 PM
Last Post: trevgbb
 
29,605
06-03-2011, 08:19 PM
Last Post: mrdunk
 
9,178
10-11-2010, 12:28 PM
Last Post: Jordan300

Forum Jump:

[-]
10 Latest Posts
2010 Specialized Hardrock
Today 11:43 AM
What tools have you bought recently?
Yesterday 06:57 PM
Santini fluted frame
Yesterday 06:47 PM
Expensive bikes with crappy wheels
Yesterday 10:15 AM
Where are you from and What is your favo...
03-27-2024 11:43 PM
2007 Trek Pilot S.P.A. 5.2
03-27-2024 07:06 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
22 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. meamoantonio
15 posts
no avatar 4. Jesper
15 posts
no avatar 5. GirishH
15 posts