Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Chain slippage?
#1
I'm struggling to explain this issue but here goes nothing: My hybrid (Ridgeback Flight 02) is running well on the whole, however occasionally when I push down on the pedal there's a kind of crunching sound as if the bike has slipped out of gear. When I try to pedal once more it usually continues to turn as if nothing's happened, however changing down usually helps things become smoother. I'm wondering if this is due to a worn sprocket (two solid years of riding EVERY day), a loose chain (feels okay), or is just because I'm in too high a gear at the time? I clean the chain once a week. Any suggestions welcome.
Return of the Mech
  Reply
#2
Have you looked all of the gear teeth over good for sharp point on the teeth or if they look lopsided. and messure the chain, take look at thip page for a better dscription than I can give you

http://bikeride.com/chain-wear/
Hi FredS here, as I can not get my old sign-on to work and have not had any luck at getting the password reset; I have started over with this sign-on.
  Reply
#3
Maybe check rear derailleur alignment & adjustment?
Cross chaining?
Remember to change a worn chain & the rear gears simultaneously.
  Reply
#4
two years solid riding - you most likely need a new cassette and a new chain. As Jeff says, replace both at the same time.
Nigel
  Reply
#5
Actually if one changes the chain often enough and ride a variety of gears without tromping too hard it may not be necessary to always replace the rear. Essentially no such thing as skipping due to a loose chain. It's always under tension when you pedal - otherwise you would not go forward.

Pedaling hard will not cause skipping if everything is adjusted properly and not worn, but pedalling frequently in too high a gear will cause faster wear - with no benefit.
  Reply
#6
Actually if one changes the chain often enough and ride a variety of gears without tromping too hard it may not be necessary to always replace the rear. Essentially no such thing as skipping due to a loose chain. It's always under tension when you pedal - otherwise you would not go forward.

Pedaling hard will not cause skipping if everything is adjusted properly and not worn, but pedalling frequently in too high a gear will cause faster wear - with no benefit.
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
3,140
08-31-2020, 01:52 AM
Last Post: Jesper
 
9,452
04-24-2011, 02:54 AM
Last Post: Cbusbikenewb
 
8,228
08-25-2009, 09:12 AM
Last Post: Joe_W
 
9,640
08-22-2009, 09:17 AM
Last Post: Joe_W
 
11,272
03-31-2009, 03:32 AM
Last Post: aitch

Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 01:39 PM
Expensive bikes with crappy wheels
Today 10:15 AM
Where are you from and What is your favo...
Yesterday 11:43 PM
2007 Trek Pilot S.P.A. 5.2
Yesterday 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
16 posts
no avatar 4. GirishH
15 posts
no avatar 5. meamoantonio
15 posts