Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Help with my squeaks, video incl
#1
hey guys new here, wanted to get some opinions on this squeaking i have been experiencing.

It only happens when a certain amount is force is applied through the pedals and gets worse as more force is applied.

The bike is a giant TCR advanced full specs in this pdf::

http://www.giant-bicycles.com/_pdf/bikes/australia/giantbicycles-57391-tcr.advanced.1.pdf

The bottom bracket is a shimano pressfit and i dont have the tool to take out the bearings which may be why i havnt discovered the problem, but the crank is well greased and cleaned as of today and still the squeaking

Here is a video of the squeaks :

Reply
#2
Did not really hear any squeaking on the video. Most of the sound that I heard was coming from the trainer. Does the bike make the noise when off the trainer?
Reply
#3
Did not really hear any squeaking on the video. Most of the sound that I heard was coming from the trainer. Does the bike make the noise when off the trainer?
Reply
#4
A squeak is typically a tone that lasts some time and may change pitch during that time. What I hear are some clicks rather than squeaks. The first thing to do is to tighten the pedals and crank arms, then chainwheel bolts. Noise from the BB is usually a lower pitch.
Reply


Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed