Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Mavic R-Sys
#1
I have a pair of Mavic R-Sys wheels with about 2500 miles on them. The front wheel has some play in it (1/8" or more) when it is in place on the frame. I have the Mavic tool which is used to tighten hub on the outside. When I unable to successfully use the tool to remove the play. When I tighten the hub down enough to remove the play the wheel begins to bind. When I back off the hub just a little bit (maybe a 1/4 turn or so) the binding stops but the play in the wheel returns. I can't find a happy medium.

I read a Mavic tech manual where you can take the hubs apart and replace the bearings. It doesn't seem to me that this should be a problem after only 2500 miles. I am looking for some guidance on this issue.

Thanks
Reply
#2
Without seeing the wheel it's always tricky to precisely diagnose why this may be. If you're able to show a local Mavic retailer they should be able to assist you directly to make sure all is well.

Ride safe,

Mike Cotty
(Mavic Community Manager)
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Mavic Crossroc wheel bperron 0 2,811 09-21-2015, 12:50 AM
Last Post: bperron
  Bearing replacement Mavic TS2 Freehub MeatyChi 3 2,783 01-03-2015, 05:02 PM
Last Post: painkiller
  New mavic wheel problem poggor 3 5,060 03-24-2014, 12:44 PM
Last Post: poggor
  Mavic Aksium 2013 - Brand New .. Out of True Stubborn Fettler 3 5,516 10-21-2012, 12:40 AM
Last Post: nfmisso
  Replace cartridge bearings in Mavic hub tab_co 1 23,206 08-31-2010, 09:44 AM
Last Post: cyclerUK
  Mavic Crossmax and Woodman hub Grego007 2 5,148 05-03-2010, 06:27 PM
Last Post: Grego007
  Mavic Ksyrium Wheels texastriguy 2 7,842 03-25-2009, 07:55 PM
Last Post: texastriguy

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed