Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Incomplete shifting with ST 4400 Shimano Tiagra
#1
Hi guys,

I recently bought a pair of st4400's off the local forums where I live. Outward appearance wise, they look good for their age. The left shifter clicks twice, so thats good.

However, the right shifter clicks only 3-4 times before it stops clicking altogether. Being a 9 speed shifter I would expect it to hear 8 clicks before finally stopping. The shifter itself moves, but no clicking can be heard.

I have not installed this yet, although the seller insists that after installing and putting the shifter under tension everything will work out fine. Is he right? Should I proceed installing the shifter and praying for the best, or is this not going to end well at all?
  Reply
#2
You can test the shifter under tension if you have a cable inserted by merely pulling on the cable with your hand while shifting the lever. If it still does not click 8 times the shifter is indeed not working properly.
  Reply
#3
Definitely do not install; check it out as our friend from Syracuse suggests; if it is good, great.

If not, there is a good chance that a thorough flushing with solvent followed by light oil lubrication will take care of it. Some people have had good results with spraying a full can of TriFlow into them. Something that is best done off the bike. http://www.amazon.com/Tri-Flow-Superior-Lubricant-4oz-Aerosol/dp/B002EX5B6O/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1400514054&sr=1-2-catcorr&keywords=triflow

Others have suggested WD40; the problem with WD40 is that it leaves a sticky, not lubricious residue behind.
Nigel
  Reply
#4
(05-19-2014, 10:28 AM)cny-man Wrote:  You can test the shifter under tension if you have a cable inserted by merely pulling on the cable with your hand while shifting the lever. If it still does not click 8 times the shifter is indeed not working properly.

Thanks for your replies. I've indeed tested it - and the same thing repeats itself. The shifter goes through 3-4 gears, before failing to engage anything else. The shifter still moves, but just that it dosen't seem to be able to latch on to the next gear.

I've pretty much got a lemon haven't I?
  Reply
#5
have you tried flushing with solvent?
Nigel
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
What tools have you bought recently?
Yesterday 06:57 PM
Santini fluted frame
Yesterday 06:47 PM
Expensive bikes with crappy wheels
Yesterday 10:15 AM
Where are you from and What is your favo...
03-27-2024 11:43 PM
2007 Trek Pilot S.P.A. 5.2
03-27-2024 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. meamoantonio
15 posts
no avatar 4. Jesper
15 posts
no avatar 5. GirishH
15 posts