Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Issue with Truing Wheel
#1
I have an issue with lateral adjustment. I have a high spot, so I loosen the spokes on the high side, tighten on the low side. I see some improvement, but it’s never enough, and it comes to the point where the high side spokes are very loose, and the opposite very tight. Help?

Reply
#2
If the spoke on the "high side" are getting very loose and it is not straigthening, it is likely that the rim itself is bent. Some people claim to have had success straightening rims by loosening spokes and bending the actual rim straight. But in my experience, this usually means the rim is toast.

Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Wheel Truing. "Half-diamond" shape. RyanMaloney 4 5,428 09-13-2013, 06:29 PM
Last Post: RyanMaloney
  Wheel ovalising when truing surreypete 6 8,798 10-14-2012, 02:32 PM
Last Post: RobAR
  Wheel spokes/nipples truing Rama Owhl 17 26,091 06-18-2011, 07:45 AM
Last Post: Joe_W
  Wheel truing busymate 2 7,578 08-02-2010, 08:58 AM
Last Post: trevgbb
  Truing bladed spokes James_in_Utah 6 15,883 04-05-2010, 11:33 AM
Last Post: James_in_Utah
  First attempt at wheel truing. surreypete 1 7,441 03-17-2010, 09:20 PM
Last Post: Alex Ramon
  Wheel truing: which direction is 'correct'? civilisationshift 9 11,605 02-24-2010, 11:57 AM
Last Post: Joe_W
  Truing a wheel KDC1956 5 5,558 01-15-2010, 08:49 AM
Last Post: Joe_W
  Truing my first wheel Jordan300 6 5,389 01-14-2010, 01:52 AM
Last Post: Jordan300
  Truing a Wheel silentthunder 2 6,529 11-24-2009, 08:17 AM
Last Post: Joe_W

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed