Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Basic Spokes Question
#1
I broke two spokes and resolved to fix them myself.

I removed the cassette on the wheel, removed the broken spokes, thread the new spokes through the hub and the other spokes, but I cannot get the new spokes to screw into the old nipples. Or, rather, I can get them started, but there is a point past which my spoke wrench will not turn.

I am starting to think that I need to replace the old nipple with the new nipple that came with the new spoke.

Now that I type it out it seems obvious, but is this right? New spokes will not always go into old nipple?

Thanks in advance for your help.
  Reply
#2
Not all spokes have the same threading or end diameter, and in any case it's always good practice to replace spoke and nipple together. New spokes should be sold with the nipple.
  Reply
#3
(07-24-2014, 10:05 AM)cny-man Wrote:  Not all spokes have the same threading or end diameter, and in any case it's always good practice to replace spoke and nipple together. New spokes should be sold with the nipple.

Thank you very much. I thought so.

Back to work!
  Reply
#4
Furthermore; nipples are soft material, and deform when used by design. They should ALWAYS be replaced, and not reused.

When you replace a spoke; loosen all the other spokes by at least one full turn, then tension, true, stress relieve, repeat until there is no need to true after stress relieving.

Given you had spoke failure, it is most like that the original wheel build was not to high enough tension.
Nigel
  Reply
#5
Correct, when you break 2 spokes more are likely to break, with the possible exception of one that break due to an accident.
  Reply
#6
(07-24-2014, 03:06 PM)cny-man Wrote:  Correct, when you break 2 spokes more are likely to break, with the possible exception of one that break due to an accident.
Exactly.

My rule is break one, replace it; break two, replace all.

Must of been asleep......
Nigel
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
5,061
05-09-2023, 08:07 AM
Last Post: ichitan
 
11,424
01-21-2014, 04:48 PM
Last Post: 1FJEF
 
11,608
03-11-2013, 01:42 PM
Last Post: nfmisso
 
21,982
10-06-2012, 07:01 AM
Last Post: surreypete
 
7,050
10-04-2012, 04:11 PM
Last Post: dochoot
 
31,511
02-27-2012, 11:16 AM
Last Post: barefooter

Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 01:39 PM
Expensive bikes with crappy wheels
Today 10:15 AM
Where are you from and What is your favo...
Yesterday 11:43 PM
2007 Trek Pilot S.P.A. 5.2
Yesterday 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
16 posts
no avatar 4. GirishH
15 posts
no avatar 5. meamoantonio
15 posts