Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Bearing replacement Mavic TS2 Freehub
#1
Morning All,

One of my bearings collapsed in the free hub so I decided to see if I could fix it. After cleaning all the gunk out I was able to see the circlip on the threaded side of the hub.

[Image: hj1ae8Ql.jpg]

I then removed circlip thinking it should be just a case of knocking the old ones out and replacing however there doesn't appear to be anyway to knock these little buggers out.

Here is a pic of the other side

[Image: Rv32fIql.jpg]

Hopefully you can see that the design of the hub doesn't appear to let you take them out. Is there a special tool or something you need to unscrew the paw side from the threaded side?

Has anyone managed to extract the bearings form Mavic TS2 free hub or have they performed some kind of wizardry to get them in?

Cheers!
Reply
#2
this is built like yours I think. check out this video
https://www.youtube.com/watch?v=_fBJzbhrMkY
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
Reply
#3
Thx Painkiller!

Here is what i ended up doing:

1. Removed Internal circlip
2. Sat the free hub thread side down
3. Warmed it up a little with a heat gun
4. Gently knocked the collapsed bearing out using a suitable sized socket wrench extender and mallet
5. Removed the spacer
6. Repeat step 4

I'm just waiting for the replacement bearings so i can put it back together again. It beats paying £32 for a new free hub Wink
Reply
#4
I hope it works out for ya. One thing about Mavic, they did rewrite the book on alot of stuff and often have their own service tools
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Mavic Crossroc wheel bperron 0 2,935 09-21-2015, 12:50 AM
Last Post: bperron
  What freehub do I have? juan82 3 2,876 08-01-2015, 12:34 AM
Last Post: painkiller
  Mavic R-Sys jacke 1 2,587 02-16-2015, 02:45 PM
Last Post: Mike Cotty
  New mavic wheel problem poggor 3 5,419 03-24-2014, 12:44 PM
Last Post: poggor
  Looking for a better bearing bikerider 4 4,137 03-06-2014, 03:35 AM
Last Post: BradleyF5
  Mavic Aksium 2013 - Brand New .. Out of True Stubborn Fettler 3 5,703 10-21-2012, 12:40 AM
Last Post: nfmisso
  Bearing\hub inspection moosemouse 2 5,066 10-20-2011, 06:33 PM
Last Post: moosemouse
  Dust cap loose after cone & bearing replacement abrookewood 5 10,137 07-01-2011, 08:37 AM
Last Post: abrookewood
  Bearing size? nd456 10 17,776 11-06-2010, 06:15 AM
Last Post: JohnnyCO
  Replace cartridge bearings in Mavic hub tab_co 1 23,423 08-31-2010, 09:44 AM
Last Post: cyclerUK

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed