Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


What Freehub body do I have?
#1
I have a 2012 Trek 7.5 Fx Hybrid bike that I need to replace the Freehub body on the rear wheel. There are no identifying marks on this hub anywhere. The cassette that is mounted on the Freehub body is a CS-HG61-9. The gears on the cassette is 11-34 and its a 9 speed. Is there anyway to exactly identify what freebody hub this is so I can get an exact replacement?
  Reply
#2
(01-27-2015, 12:06 PM)MK86GFCS Wrote:  ...... Is there anyway to exactly identify what freebody hub this is so I can get an exact replacement?

Probably not. First remove the freehub, if it is a Shimano you need a 10mm hex key. If that is not the tool for removing it - it is not Shimano, and it may be impossible to source a replacement. If it is a Shimano, any of their "normal" 8/9/10 speed freehubs will fit.


Why do you think that you need to replace the freehub; especially on such a new bike?
Nigel
  Reply
#3
I tried a 10mm hex key and its too small by a couple of mm. It looks more like a spline in there than a hex. Guess I'm out of luck. I was replacing the cassette since the gears I use most are worn out and noticed there is a bit of slop in the freehub. I was going to take care of everything at the same time while I have it apart. Even though its a fairly a new bike I have over 15k miles on it. just normal wear and tear. Thanks
  Reply
#4
(01-27-2015, 02:09 PM)MK86GFCS Wrote:  .... a bit of slop in the freehub. .....

There is always a bit of slop in freehubs, has to be or they would not work. As long as the pawls feel good, and are not making too much noise, leave it.

A little bit of light machine oil helps the pawls, but can hurt the bearings.

Kind of reminds me of the story about when Rolls Royce licensed GM's Turbohydramatic automatic transmission in the late 1950's. The ones GM built worked very well; the first ones RR built would not transmit any torque - the cars would not move. Turns out RR polished everything inside to a bright smooth finish - just like the visible portions of their cars. The torque converter rotor and stator have to be be rough for the fluid to transmit torque......
Nigel
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
10,673
07-31-2015, 08:34 PM
Last Post: Painkiller
 
52,910
07-14-2013, 05:27 PM
Last Post: Gixxer
 
19,667
05-23-2013, 11:21 AM
Last Post: mmontero
 
9,228
05-08-2013, 11:09 PM
Last Post: nfmisso
 
9,766
01-26-2013, 01:29 PM
Last Post: 1FJEF
 
13,103
11-14-2010, 05:10 AM
Last Post: stancho

Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 01:39 PM
Expensive bikes with crappy wheels
Today 10:15 AM
Where are you from and What is your favo...
Yesterday 11:43 PM
2007 Trek Pilot S.P.A. 5.2
Yesterday 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
16 posts
no avatar 4. GirishH
15 posts
no avatar 5. meamoantonio
15 posts