Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the Latest Giveaway coming soon


Bike not coasting
#1
Love the site. I've used it on many occasions. I have a problem that you may not have addressed yet. I have an old trek 12 speed that I use every day. Recently, when I walk my bike down the street, the pedals move forward as if a ghost is pedaling it and I don't hear the clicks. No matter what position my rear derailleur is in. I've also been having a much harder time pedaling backwards while riding. Again, no matter what position my rear derailleur is in, it's getting progressively worse. One more thing to add is that the bike does still coast, but only when I'm riding it, and my feet are actively keeping the pedals from moving. The clicks sound a little different too. Longer clicks - very "uncrisp". Any ideas? Is this a rear derailleur problem or a hub problem? Thanks.

[attachment=19]
  Reply
#2
I'm guessing you have a <a href="http://bikeride.com/replace-freewheel/">freewheel</a> on your bike (as opposed to a <a href="http://bikeride.com/replace-cassette-cluster/">cassette</a>), and it is likely gummed up inside. Some bike shops may recommend replacing it, but if you have a good bike shop nearby they may be able to free it up with a freewheel greasing tool (hard to find these days). First they'll flush it out with solvent and then force new grease in. If you remove the freewheel so they don't have to it likely won't cost that much.

  Reply
#3
Quick test you can do: Lay you bike on its side with the gears up. Drip chain lube into the freewheel right at the point between where the outer part (gears) rotate and the inner section stays still. Drip some in, then back pedal a little to work it inside. If you do this a few times and it improves, then the free wheel is just gummed up inside. Then its worth having fresh grease injected in as the chain lube is too thin to provide adequate lubrication long term.

  Reply
#4
Thanks guys. I took off the freewheel and put some oil in the point between where the outer part (gears) rotate and the inner section stays still. Worked immediately. Might be temporary, we'll see how it goes.

  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
10,000
09-28-2012, 12:28 PM
Last Post: nfmisso
 
25,075
10-11-2009, 04:46 PM
Last Post: DaveM

Forum Jump:

[-]
10 Latest Posts
Christmas presents for cycling
Yesterday 10:23 PM
Lectric One
04-17-2024 09:58 PM
Cycling in the Wind
04-17-2024 03:45 PM
Do you have a four foot rule?
04-17-2024 12:49 PM
What New Year's Cycling Resolutions Do Y...
04-17-2024 10:58 AM
E-Bike with my camera
04-16-2024 09:47 PM
Tyres keep popping off wheels...
04-16-2024 04:45 PM
Saronni Colnago Critrium Frame set
04-16-2024 03:26 PM
Rear hub issue
04-16-2024 04:18 AM
Vintage (and mint) Torelli...unknown yea...
04-16-2024 12:43 AM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Jesper
27 posts
no avatar 2. enkei
26 posts
no avatar 3. Frankly
20 posts
no avatar 4. Painkiller
15 posts
no avatar 5. meamoantonio
12 posts