Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Rear wheel keeps shifting
#1
I just tuned my '76 Schwinn cruiser up for spring, and after riding as far as my daughter's bus stop my rear wheel has shifted over far enough that the tire is hard against the frame. So I readjust, tighten it back down, and in the same time my wheel has shifted again. It's gone as tight as it can. I'm wondering if the mounting brackets of the fender are causing the nut to slip. Perhaps moving them to the inside of the frame would help? Any suggestions?

Edit: It only seems to be the drive side that slips. The chain is loose and the tire presses against the non-drive side under the seat post at the bottom of the frame.
  Reply
#2
(03-14-2016, 05:01 PM)NotRequired Wrote:  I just tuned my '76 Schwinn cruiser up for spring, and after riding as far as my daughter's bus stop my rear wheel has shifted over far enough that the tire is hard against the frame. So I readjust, tighten it back down, and in the same time my wheel has shifted again. It's gone as tight as it can. I'm wondering if the mounting brackets of the fender are causing the nut to slip. Perhaps moving them to the inside of the frame would help? Any suggestions?

Edit: It only seems to be the drive side that slips. The chain is loose and the tire presses against the non-drive side under the seat post at the bottom of the frame.

(04-01-2016, 07:13 PM)jtj Wrote:  
(03-14-2016, 05:01 PM)NotRequired Wrote:  I just tuned my '76 Schwinn cruiser up for spring, and after riding as far as my daughter's bus stop my rear wheel has shifted over far enough that the tire is hard against the frame. So I readjust, tighten it back down, and in the same time my wheel has shifted again. It's gone as tight as it can. I'm wondering if the mounting brackets of the fender are causing the nut to slip. Perhaps moving them to the inside of the frame would help? Any suggestions?

Edit: It only seems to be the drive side that slips. The chain is loose and the tire presses against the non-drive side under the seat post at the bottom of the frame.
I am no expert but maybe dish has shifted.
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
What tools have you bought recently?
Today 06:57 PM
Santini fluted frame
Today 06:47 PM
Expensive bikes with crappy wheels
Today 10:15 AM
Where are you from and What is your favo...
Yesterday 11:43 PM
2007 Trek Pilot S.P.A. 5.2
Yesterday 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
16 posts
no avatar 4. GirishH
15 posts
no avatar 5. meamoantonio
15 posts