Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the March Giveaway: Coming Soon 3/24


Re-spray alloy Cannonade (US made frame)
#1
Hi

I have an old Cannonade Bad Boy. Frame was made in the US. The paint has bubbled all over the place and the alloy has oxidised underneath it. I want to strip it - check the frames integrity and then re-spray it if it's not compromised.

Before anyone starts - I'm aware how about intensive stripping frames by hand is. I've done this with a couple of steel bikes.

Questions are:
What's the best paint stripper for an alloy bike? Nitromors? Is there something better?

What's the best primer for alloy? Have read this is good:

https://www.amazon.co.uk/U-Pol-ACID-Acid-Etch-Primer/dp/B006HFM5YG/ref=sr_1_fkmr1_1?ie=UTF8&qid=1475159078&sr=8-1-fkmr1&keywords=Upol+etch+primer+bike

What's the best paint. By best, I mean - most resilient to sweat & water. Want to avoid the oxidation for as long as possible (Hammerite?) (nb - looking for a matt black finish).

Thanks
  Reply
#2
Are you planning on use spray cans for the whole job, Like primer in your link
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply
#3
(09-29-2016, 05:14 PM)painkiller Wrote:  Are you planning on use spray cans for the whole job, Like primer in your link

Hi there. Thanks for getting back.

Yes. Planning to use spray cans. Previously found that with a bit of care could get a clean finish.

e
  Reply
#4
(09-29-2016, 05:20 PM)ebgt Wrote:  
(09-29-2016, 05:14 PM)painkiller Wrote:  Are you planning on use spray cans for the whole job, Like primer in your link

Hi there. Thanks for getting back.

Yes. Planning to use spray cans. Previously found that with a bit of care could get a clean finish.

e
I use an Aircraft stripper for a lot of things alloy, comes in a spray can found at many Auto parts store here in the US. etching primer would work or a zinc chromate type of primer. Cannot recommend a top coat in your area. I would go with an automotive paint and clearcoat myself. Here in the US automotive paint suppliers are able to make spray cans for you. Look into that in your area
There are two kinds of people in the world, "Those who help themselves to people, and those who help people!"
  Reply


Possibly Related Threads...
Thread
Author
Replies
Views
Last Post
 
11,965
04-03-2014, 01:37 PM
Last Post: warrenpe
 
12,438
10-02-2012, 09:08 PM
Last Post: RobAR
 
6,344
01-27-2012, 07:11 PM
Last Post: Sparky

Forum Jump:

[-]
10 Latest Posts
Santini fluted frame
Today 07:44 AM
Where are you from and What is your favo...
Yesterday 11:43 PM
2007 Trek Pilot S.P.A. 5.2
Yesterday 07:06 PM
2010 Specialized Hardrock
03-26-2024 09:16 PM
1990 Specialized Rockhopper How to Fluff...
03-25-2024 07:05 PM
Thread busted on right pedal crank
03-24-2024 08:52 PM
Trek domane tyre
03-24-2024 05:48 PM
Modern rims crack at spoke holes
03-24-2024 05:32 PM
Cup & Cone — Simple & Durable or PITA & ...
03-24-2024 04:53 PM
Falling back
03-24-2024 04:45 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. Painkiller
21 posts
no avatar 2. ReapThaWhirlwind
16 posts
no avatar 3. Jesper
15 posts
no avatar 4. meamoantonio
15 posts
no avatar 5. GirishH
15 posts