Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
How to Adjust Your Front Derailleur How to Adjust Your Front Derailleur
* Now with 3D interactive instructions
From 1st to 2nd-problem
#1
Hi.

Sorry I dont know if this is in the right section of the forum.

I just got a mtb for the 1st time as an adult. On the left hand side of the handle bars where you can change for 1 to 2 to 3. When I change from 1 to 2 it doesnt alwaya do it. The dial moves to 2 but the bike makes an awful noise and no matter how much i pedel it still makes that noise. If I then go into 3 it then after a good few seconds it eventually corrects itself and stops making then noise and changes correctly.

On the right hand side of the bike, the numbers all go up and down no problem.

Is it something im doing wrong?

It was my first time out on it today.

Its a carrera vegeance.

Thank you
Reply
#2
(07-02-2017, 05:03 PM)Millerblade Wrote:  Hi.

Sorry I dont know if this is in the right section of the forum.

I just got a mtb for the 1st time as an adult. On the left hand side of the handle bars where you can change for 1 to 2 to 3. When I change from 1 to 2 it doesnt alwaya do it. The dial moves to 2 but the bike makes an awful noise and no matter how much i pedel it still makes that noise. If I then go into 3 it then after a good few seconds it eventually corrects itself and stops making then noise and changes correctly.

On the right hand side of the bike, the numbers all go up and down no problem.

Is it something im doing wrong?

It was my first time out on it today.

Its a carrera vegeance.

Thank you
I'm no experienced bicycle expert but I would say try adjusting your front derailleur alignment. If that does not work, then take it your lbs (local bike shop). Hope this helps.
Reply


Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed