How do I crack open a ROLF Satellite hub?

07-19-2008, 07:05 PM

Alex,
This is a ROLF Satellite hub. Not sure how to crack it open? Two cone wrenches I guess?
Chuck
<img src="http://bikeride.com/images/forums/0004.jpg" />

Alex Ramon · 07-19-2008, 07:06 PM

Hi Chuck,
That's a nice hub... hope you can get it fixed. Yup, two cone wrenches should do it... put one on the flats closest to the hub, hold it tight, and then loosen the outer nut counter-clockwise.

07-19-2008, 07:06 PM

Thanks Alex... I'll let you know how it goes.

07-19-2008, 07:06 PM

Got it done. The bearings were worn and there was just enough grease in there to coat the bearings. hardly any grease in there at all. I put new bearings in there and greased the hub up good. Cannot hear any hollow clicking noises now. Thanks for your help.

Alex Ramon · 07-19-2008, 07:07 PM

Glad to hear it worked out, that's super!

10 Latest Posts
Christmas presents for cycling Yesterday 10:23 PM
Lectric One 04-17-2024 09:58 PM
Cycling in the Wind 04-17-2024 03:45 PM
Do you have a four foot rule? 04-17-2024 12:49 PM
What New Year's Cycling Resolutions Do Y... 04-17-2024 10:58 AM
E-Bike with my camera 04-16-2024 09:47 PM
Tyres keep popping off wheels... 04-16-2024 04:45 PM
Saronni Colnago Critrium Frame set 04-16-2024 03:26 PM
Rear hub issue 04-16-2024 04:18 AM
Vintage (and mint) Torelli...unknown yea... 04-16-2024 12:43 AM

Join BikeRide on Strava

Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom