Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
How do I crack open a ROLF Satellite hub?
#1
Alex,
This is a ROLF Satellite hub. Not sure how to crack it open? Two cone wrenches I guess?
Chuck


Reply
#2
Hi Chuck,
That's a nice hub... hope you can get it fixed. Yup, two cone wrenches should do it... put one on the flats closest to the hub, hold it tight, and then loosen the outer nut counter-clockwise.

Reply
#3
Thanks Alex... I'll let you know how it goes.

Reply
#4
Got it done. The bearings were worn and there was just enough grease in there to coat the bearings. hardly any grease in there at all. I put new bearings in there and greased the hub up good. Cannot hear any hollow clicking noises now. Thanks for your help.

Reply
#5
Glad to hear it worked out, that's super!

Reply


Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed