Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
How to Adjust Your Front Derailleur How to Adjust Your Front Derailleur
* Now with 3D interactive instructions
Possible to remove clip from shifter?
#1
Is it possible to remove the click / ball and just go to friction only on Shimano shifter sl-sy20a. Maybe replace the ball and cage with a washer of some sort?

Thanks
Shawn
Reply
#2
You mean like the old school 10speed type shifters?
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply
#3
(11-23-2009, 12:13 AM)Bill Wrote:  You mean like the old school 10speed type shifters?

Sort of, It seems to be the in between type. It has a cage with two ball bearing. Wonder if I can replace this with a washer.
http://techdocs.shimano.com/media/techdocs/content/cycle/EV/bikecomponents/SL/EV-SL-SY20A-2227_v1_m56577569830612668.pdf
Reply
#4
(11-23-2009, 12:45 AM)Shawn Wrote:  
(11-23-2009, 12:13 AM)Bill Wrote:  You mean like the old school 10speed type shifters?

Sort of, It seems to be the in between type. It has a cage with two ball bearing. Wonder if I can replace this with a washer.
http://techdocs.shimano.com/media/techdocs/content/cycle/EV/bikecomponents/SL/EV-SL-SY20A-2227_v1_m56577569830612668.pdf

That sounds possible in theory. The only down side I would see is that you would need to take up the space the caged bearing has. Also if it is a click style eliminating the bearing may let it move about freely. Like per say it works great and you are riding and hit a bump it may all of a sudden move to another position (change gears) on you and you may have to switch it back. If you decide to attempt it make sure you measure the space that the caged bearing take up in diameter and from side to side and replace with washer(s) that would have the same value. That is all I can offer on advice. Just be careful if you succeed by testing. Cheers and Good luck

Bill
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply
#5
Well, I had to reset my rear cable, and used the bike. The shifter is still a clicker. It seem to work pretty good with my old rear derailleur. So I will see what I think in the spring. Unless some warmer days come. It was pretty chilly today..

Thanks for the help. Shawn
Reply
#6
(12-05-2009, 04:11 AM)Shawn Wrote:  Well, I had to reset my rear cable, and used the bike. The shifter is still a clicker. It seem to work pretty good with my old rear derailleur. So I will see what I think in the spring. Unless some warmer days come. It was pretty chilly today..

Thanks for the help. Shawn

Congratulation I am glad your mod worked well and that it still clicks. Smile .
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Replacement parts for TREX shifter ( Shimano - Altus ST-CT20) right rear shifter ejhern 1 12,332 03-29-2010, 02:01 AM
Last Post: Surly LHT
  Remove lower shifter on a DCL divisionbyzero 2 4,420 02-24-2009, 06:50 PM
Last Post: cyclerUK

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed