Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Size 48 handlebars?
#1
Anyone know where I can get some good quality 48 size handlebars? and/or have some good recommendations for some nice wide handlebars? I've got really wide shoulders, but finding 48's has been tough.
Reply
#2
Thor,
Can you be a little more specific? 48" or ???
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply
#3
Nitto do some 48 sizebars but they are special. Try Googling.
Also here:-
http://www.sheldonbrown.com/harris/handlebars/index.html

model = HB106 48 cm
[font=Trebuchet MS]Ride hard or ride home alone![/font]
Reply
#4
Very cool, thanks cyclerUK I really would not of known that. That daggon measurement barrier gets me from time to time lol.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply
#5
The main thing about sizing is I never know if it's to the outside of the bars or center to center. Sometimes shops state whether it's C-C or outside which helps.

The usual max' size = 46 cms.
[font=Trebuchet MS]Ride hard or ride home alone![/font]
Reply
#6
(12-16-2009, 02:13 PM)cyclerUK Wrote:  The main thing about sizing is I never know if it's to the outside of the bars or center to center. Sometimes shops state whether it's C-C or outside which helps.

The usual max' size = 46 cms.

Ok when you say center to center I am at loss? Here is a little diagram with the arrows. I am guessing you mean from the outer right side to center of the bar, and from the outer left side to the same center point? Again the actual diagram may not be perfectly centered lol.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply
#7
Bill, (i'm sure you know this already)

Center to Center (C to C) is the center of the hole of one bar end to the center of the hole of the bar end.

O.................... O
.l<------------->l

I'm referring to "drop" bars. But as I say I'm not sure if the dimension should be C-C or outside edge to outside edge?

I assumed, maybe wrongly, that when "Thor" mentioned 48's that he was talking drops ??
(The only sizing I have come across for drops has always been stated in centimeters. It may be different in the USA?)

Unfortunately I tend to talk in general about bikes with drops as they are the most I come in contact with.
Sorry if there was some confusion or misunderstanding.
[font=Trebuchet MS]Ride hard or ride home alone![/font]
Reply
#8
Oh ok, I see now Smile . Thank you for explaining. I should have known that as well. Drops are really cool. As far as the measurement in cm it may be the same here in the US because Sheldon Brown lived in the us right? I know we use alot of Metric system for Bicycles. Again thanks for the help.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
Reply
#9
Well, with drop bars there's also the problem whether you are measuring the downward bend or the part that is (more or less) parallel to the ground. There are several types of drop bars (linked above)
Reply
#10
I have never seen 48cm drop bars, and if I HAD, I'd have gotten some a few years ago!

46 (c-c) is the biggest I've seen; Salsa made 'em.
http://www.hiyokahspeax.blogspot.com
Specialized is bullying epicericdesigns -- boycott!
Reply
#11
(12-16-2009, 01:40 AM)Thor Wrote:  Anyone know where I can get some good quality 48 size handlebars? and/or have some good recommendations for some nice wide handlebars? I've got really wide shoulders, but finding 48's has been tough.

Maybe this will help you. Nitto Noodle 177 Heat-treated 48cm 26.0mm Clamp
Brand: Nitto
Nitto Noodle 177 Heat-treated 48cm 26.0mm Clamp
(Enlarge)

MFR's Part #: M-177 HT 480mm
Model: Noodle 177

Price: $77.95
My dad always told me a Sledge a matic can fix any thing.
Reply


Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed