|
Compatibility of Components
|
| Author |
Message |
Joe_W
Senior Member
    
Posts: 310
Joined: Jul 2009
|
Sheldon brown says, that it could work
http://sheldonbrown.com/speeds.html
"Going the other direction, using wider chains with chainrings intended for narrower chains is not generally a major problem if there's only a one or two generation difference. The only problem you might run into is that the chain will be more liable to rub on the inside of the bigger chainrings in the small/small crossover gears, gears you shouldn't be using in any case. "
But: you have to look whether the BB / crank set matches the chain line of your front derailleur, other than that I see no problems. Use an 8speed chain, as the rear cassette will most probably not accept a 9spd one. Go for a good one, the cheap chains will be worn out quite fast, so you end up paying more, I think the HG70 is ok. Oh, and if you buy a new chain, go and get a new cassette.
|
|
| Sep 2, 2009 04:13 AM |
|