Bicycle TutorBicycle Tutor

Show off your bike!

Related video tutorials:
Triple trouble
#1
Returning to cycling after a hundred years away... FSA triple and 105 dérailleur up front, 10 speed cassette with Ultegra 6600 long reach in the rear. DuraAce chain. All gear combinations function but I would like all 10 speeds using the middle chain ring to be clean and quiet. On the smallest rear gear (12t) the chain is "ticking" against the inside surface of the 52t chain ring. Am I asking for too much?
...j
Reply
#2
Yes, you are asking for too much... sorry. Look at Shimano's techdocs, they do mention something like that. In general, all extreme gear combinations are not usable (and should not be used).
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Looking for a chainring guard for a triple. critter5050 6 5,562 07-25-2014, 04:44 PM
Last Post: critter5050
  Triple chainset replacement zak rider 7 4,832 01-24-2014, 04:51 PM
Last Post: nfmisso
  Upgrading from twin to triple rings Bushyuk 6 6,619 01-02-2013, 07:29 AM
Last Post: Joe_W
  Chain on SS conversion trouble ARThriller 11 11,681 06-21-2011, 03:38 AM
Last Post: Bill
  Freewheel Upgrade trouble capner2112 7 8,915 06-16-2011, 04:53 PM
Last Post: GeorgeET
  Trouble threading lockring eorta7 5 7,481 01-16-2011, 09:16 PM
Last Post: trevgbb
  Another 10-speed... more trouble j beede 1 3,940 05-17-2010, 11:31 AM
Last Post: Jordan300
  Ultegra triple ringing on middle chain ring kkramko 7 10,616 05-09-2010, 10:05 AM
Last Post: Joe_W
  Triple chainring to single jr14 3 7,978 04-24-2010, 02:38 AM
Last Post: jr14
  Trouble selecting highest gear gsxr1 4 7,405 02-02-2010, 03:39 PM
Last Post: gsxr1

Forum Jump:



ISSN 1918-3445 © Copyright 2007-2010 Bicycle Tutor / Privacy Policy / Created by Alex Ramon

feed