Have questions or want to discuss cycling? Join Now or Sign In to participate in the BikeRide community.

New: Take Part in the Latest Giveaway coming soon


Removing Shimano FFS cassette
#1
I'm (still) working on a 1984 Schwinn World Tourist, which has Shimano's Front Freewheel System.
Everything seems to work well on the bike already, so all I'm doing is replacing the brake cables & pads, cleaning, removing surface rust and overhauling the bearings.

The bottom bracket doesn't look like it'll be a problem, but I'm currently stuck on the rear cassette. I haven't been able to find any useful information. So far I've checked Sheldon Brown's site, Park Tools and Shimano. Other than some old catalog pages and Sheldon's personal opinion of the system, I've got nothing.

Has anyone here worked on one of these before?

From behind:
[attachment=1116]

Close-up:
[attachment=1117]

And closer:
[attachment=1118]
Those last pictures really show how gunked up it is. I'll try to clean that out during my lunch break and see if anything useful shows up. Splines would be nice.
  Reply
#2
OK, I found the splines; I wasn't thinking too clearly and hadn't removed the nuts and washers when I took the pictures.

This shot's blurry, but there they are.

[attachment=1119]
  Reply
#3
How many splines?

EDIT: Just wandering in case I ever come across this type.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#4
12, very shallow. I may write to Park to see if they have a recommendation, but I'm going to drop by the LBS after work today. Hopefully they can get it off without destroying it. I'm trying to get this bike done and delivered to a friend's daughter this week.
  Reply
#5
Go ahead and write park and go to the LBS today but you may find that you will need a Bicycle Research CT-4. They sell them on ebay. Known as the Shimano boss. Let me know what it is. Here is a pic of the CT-4
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply
#6
It looks like it would do the trick.
  Reply
#7
(07-01-2010, 06:13 PM)Billy Wrote:  It looks like it would do the trick.

Wouldn't settle for that though, I don't know if you saw the thread on how to measure spline to spline but that is how you know. If it is around 19.5mm-21mm then that is the tool you need. No I got mine from ebay, which was actually 15.00 cheaper. I actually got like 3 more after I got the first one. They are ok but as I said needed better design.
Good maintenance to your Bike, can make it like the wheels are, true and smooth!
  Reply


Possibly Related Threads...

Forum Jump:

[-]
10 Latest Posts
$10,000?
Today 08:03 PM
Do you have a four foot rule?
Today 01:39 PM
Cycling in the Wind
Today 01:35 PM
(sorta kinda) NBD Genesis CdF 20
Today 01:07 PM
Fair Weather Cycling
Today 10:00 AM
What was your first bicycle?
Today 09:19 AM
QUINTANA ROO "KILO" 1999
Today 09:16 AM
How much do you bike per year?
Today 09:10 AM
Specialized expedition in need of repair
Today 12:37 AM
What is your dream cycling destination?
04-24-2024 11:15 PM

[-]
Join BikeRide on Strava
Feel free to join if you are on Strava: www.strava.com/clubs/bikeridecom

[-]
Top 5 Posters This Month
no avatar 1. enkei
27 posts
no avatar 2. Jesper
26 posts
no avatar 3. GirishH
14 posts
no avatar 4. meamoantonio
13 posts
no avatar 5. Amanda_W
13 posts